Followup to #6087: Cleaned up code of IRRE localization
[Packages/TYPO3.CMS.git] / t3lib / class.t3lib_tcemain.php
1 <?php
2 /***************************************************************
3 * Copyright notice
4 *
5 * (c) 1999-2008 Kasper Skaarhoj (kasperYYYY@typo3.com)
6 * All rights reserved
7 *
8 * This script is part of the TYPO3 project. The TYPO3 project is
9 * free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * The GNU General Public License can be found at
15 * http://www.gnu.org/copyleft/gpl.html.
16 * A copy is found in the textfile GPL.txt and important notices to the license
17 * from the author is found in LICENSE.txt distributed with these scripts.
18 *
19 *
20 * This script is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * This copyright notice MUST APPEAR in all copies of the script!
26 ***************************************************************/
27 /**
28 * Contains the TYPO3 Core Engine
29 *
30 * $Id$
31 * Revised for TYPO3 3.9 October 2005 by Kasper Skaarhoj
32 *
33 * @author Kasper Skaarhoj <kasperYYYY@typo3.com>
34 */
35 /**
36 * [CLASS/FUNCTION INDEX of SCRIPT]
37 *
38 *
39 *
40 * 242: class t3lib_TCEmain
41 * 367: function start($data,$cmd,$altUserObject='')
42 * 406: function setMirror($mirror)
43 * 431: function setDefaultsFromUserTS($userTS)
44 * 454: function process_uploads($postFiles)
45 * 492: function process_uploads_traverseArray(&$outputArr,$inputArr,$keyToSet)
46 *
47 * SECTION: PROCESSING DATA
48 * 528: function process_datamap()
49 * 886: function placeholderShadowing($table,$id)
50 * 929: function fillInFieldArray($table,$id,$fieldArray,$incomingFieldArray,$realPid,$status,$tscPID)
51 *
52 * SECTION: Evaluation of input values
53 * 1152: function checkValue($table,$field,$value,$id,$status,$realPid,$tscPID)
54 * 1212: function checkValue_SW($res,$value,$tcaFieldConf,$table,$id,$curValue,$status,$realPid,$recFID,$field,$uploadedFiles,$tscPID)
55 * 1261: function checkValue_input($res,$value,$tcaFieldConf,$PP,$field='')
56 * 1299: function checkValue_check($res,$value,$tcaFieldConf,$PP)
57 * 1322: function checkValue_radio($res,$value,$tcaFieldConf,$PP)
58 * 1348: function checkValue_group_select($res,$value,$tcaFieldConf,$PP,$uploadedFiles,$field)
59 * 1458: function checkValue_group_select_file($valueArray,$tcaFieldConf,$curValue,$uploadedFileArray,$status,$table,$id,$recFID)
60 * 1632: function checkValue_flex($res,$value,$tcaFieldConf,$PP,$uploadedFiles,$field)
61 * 1709: function checkValue_flexArray2Xml($array, $addPrologue=FALSE)
62 * 1721: function _DELETE_FLEX_FORMdata(&$valueArrayToRemoveFrom,$deleteCMDS)
63 * 1743: function _MOVE_FLEX_FORMdata(&$valueArrayToMoveIn, $moveCMDS, $direction)
64 * 1783: function checkValue_inline($res,$value,$tcaFieldConf,$PP,$field)
65 * 1825: function checkValue_checkMax($tcaFieldConf, $valueArray)
66 *
67 * SECTION: Helper functions for evaluation functions.
68 * 1877: function getUnique($table,$field,$value,$id,$newPid=0)
69 * 1915: function checkValue_input_Eval($value,$evalArray,$is_in)
70 * 2012: function checkValue_group_select_processDBdata($valueArray,$tcaFieldConf,$id,$status,$type,$currentTable)
71 * 2058: function checkValue_group_select_explodeSelectGroupValue($value)
72 * 2082: function checkValue_flex_procInData($dataPart,$dataPart_current,$uploadedFiles,$dataStructArray,$pParams,$callBackFunc='')
73 * 2121: function checkValue_flex_procInData_travDS(&$dataValues,$dataValues_current,$uploadedFiles,$DSelements,$pParams,$callBackFunc,$structurePath)
74 *
75 * SECTION: PROCESSING COMMANDS
76 * 2267: function process_cmdmap()
77 *
78 * SECTION: Cmd: Copying
79 * 2407: function copyRecord($table,$uid,$destPid,$first=0,$overrideValues=array(),$excludeFields='')
80 * 2529: function copyPages($uid,$destPid)
81 * 2583: function copySpecificPage($uid,$destPid,$copyTablesArray,$first=0)
82 * 2617: function copyRecord_raw($table,$uid,$pid,$overrideArray=array())
83 * 2681: function rawCopyPageContent($old_pid,$new_pid,$copyTablesArray)
84 * 2705: function insertNewCopyVersion($table,$fieldArray,$realPid)
85 * 2757: function copyRecord_procBasedOnFieldType($table,$uid,$field,$value,$row,$conf,$realDestPid)
86 * 2836: function copyRecord_flexFormCallBack($pParams, $dsConf, $dataValue, $dataValue_ext1, $dataValue_ext2)
87 * 2864: function copyRecord_procFilesRefs($conf, $uid, $value)
88 *
89 * SECTION: Cmd: Moving, Localizing
90 * 2933: function moveRecord($table,$uid,$destPid)
91 * 3128: function moveRecord_procFields($table,$uid,$destPid)
92 * 3148: function moveRecord_procBasedOnFieldType($table,$uid,$destPid,$field,$value,$conf)
93 * 3182: function localize($table,$uid,$language)
94 *
95 * SECTION: Cmd: Deleting
96 * 3296: function deleteAction($table, $id)
97 * 3343: function deleteEl($table, $uid, $noRecordCheck=FALSE, $forceHardDelete=FALSE)
98 * 3360: function deleteVersionsForRecord($table, $uid, $forceHardDelete)
99 * 3382: function undeleteRecord($table,$uid)
100 * 3399: function deleteRecord($table,$uid, $noRecordCheck=FALSE, $forceHardDelete=FALSE,$undeleteRecord=FALSE)
101 * 3512: function deleteRecord_flexFormCallBack($dsArr, $dataValue, $PA, $structurePath, &$pObj)
102 * 3539: function deletePages($uid,$force=FALSE,$forceHardDelete=FALSE)
103 * 3567: function deleteSpecificPage($uid,$forceHardDelete=FALSE)
104 * 3592: function canDeletePage($uid)
105 * 3619: function cannotDeleteRecord($table,$id)
106 * 3638: function deleteRecord_procFields($table, $uid, $undeleteRecord = false)
107 * 3661: function deleteRecord_procBasedOnFieldType($table, $uid, $field, $value, $conf, $undeleteRecord = false)
108 *
109 * SECTION: Cmd: Versioning
110 * 3722: function versionizeRecord($table,$id,$label,$delete=FALSE,$versionizeTree=-1)
111 * 3798: function versionizePages($uid,$label,$versionizeTree)
112 * 3861: function version_swap($table,$id,$swapWith,$swapIntoWS=0)
113 * 4032: function version_clearWSID($table,$id)
114 * 4066: function version_setStage($table,$id,$stageId,$comment='')
115 *
116 * SECTION: Cmd: Helper functions
117 * 4111: function remapListedDBRecords()
118 * 4192: function remapListedDBRecords_flexFormCallBack($pParams, $dsConf, $dataValue, $dataValue_ext1, $dataValue_ext2)
119 * 4219: function remapListedDBRecords_procDBRefs($conf, $value, $MM_localUid, $table)
120 * 4265: function remapListedDBRecords_procInline($conf, $value, $uid, $table)
121 *
122 * SECTION: Access control / Checking functions
123 * 4308: function checkModifyAccessList($table)
124 * 4320: function isRecordInWebMount($table,$id)
125 * 4334: function isInWebMount($pid)
126 * 4348: function checkRecordUpdateAccess($table,$id)
127 * 4372: function checkRecordInsertAccess($insertTable,$pid,$action=1)
128 * 4406: function isTableAllowedForThisPage($page_uid, $checkTable)
129 * 4439: function doesRecordExist($table,$id,$perms)
130 * 4504: function doesRecordExist_pageLookUp($id, $perms)
131 * 4530: function doesBranchExist($inList,$pid,$perms,$recurse)
132 * 4564: function tableReadOnly($table)
133 * 4576: function tableAdminOnly($table)
134 * 4590: function destNotInsideSelf($dest,$id)
135 * 4622: function getExcludeListArray()
136 * 4645: function doesPageHaveUnallowedTables($page_uid,$doktype)
137 *
138 * SECTION: Information lookup
139 * 4694: function pageInfo($id,$field)
140 * 4714: function recordInfo($table,$id,$fieldList)
141 * 4735: function getRecordProperties($table,$id,$noWSOL=FALSE)
142 * 4751: function getRecordPropertiesFromRow($table,$row)
143 *
144 * SECTION: Storing data to Database Layer
145 * 4794: function updateDB($table,$id,$fieldArray)
146 * 4846: function insertDB($table,$id,$fieldArray,$newVersion=FALSE,$suggestedUid=0,$dontSetNewIdIndex=FALSE)
147 * 4919: function checkStoredRecord($table,$id,$fieldArray,$action)
148 * 4956: function setHistory($table,$id,$logId)
149 * 4989: function clearHistory($maxAgeSeconds=604800,$table)
150 * 5003: function updateRefIndex($table,$id)
151 *
152 * SECTION: Misc functions
153 * 5035: function getSortNumber($table,$uid,$pid)
154 * 5108: function resorting($table,$pid,$sortRow, $return_SortNumber_After_This_Uid)
155 * 5139: function setTSconfigPermissions($fieldArray,$TSConfig_p)
156 * 5156: function newFieldArray($table)
157 * 5188: function addDefaultPermittedLanguageIfNotSet($table,&$incomingFieldArray)
158 * 5212: function overrideFieldArray($table,$data)
159 * 5228: function compareFieldArrayWithCurrentAndUnset($table,$id,$fieldArray)
160 * 5274: function assemblePermissions($string)
161 * 5291: function rmComma($input)
162 * 5301: function convNumEntityToByteValue($input)
163 * 5323: function destPathFromUploadFolder($folder)
164 * 5333: function deleteClause($table)
165 * 5349: function getTCEMAIN_TSconfig($tscPID)
166 * 5364: function getTableEntries($table,$TSconfig)
167 * 5377: function getPID($table,$uid)
168 * 5390: function dbAnalysisStoreExec()
169 * 5406: function removeRegisteredFiles()
170 * 5418: function removeCacheFiles()
171 * 5432: function int_pageTreeInfo($CPtable,$pid,$counter, $rootID)
172 * 5453: function compileAdminTables()
173 * 5470: function fixUniqueInPid($table,$uid)
174 * 5506: function fixCopyAfterDuplFields($table,$uid,$prevUid,$update, $newData=array())
175 * 5531: function extFileFields($table)
176 * 5552: function getUniqueFields($table)
177 * 5577: function isReferenceField($conf)
178 * 5588: function getInlineFieldType($conf)
179 * 5611: function getCopyHeader($table,$pid,$field,$value,$count,$prevTitle='')
180 * 5640: function prependLabel($table)
181 * 5657: function resolvePid($table,$pid)
182 * 5687: function clearPrefixFromValue($table,$value)
183 * 5702: function extFileFunctions($table,$field,$filelist,$func)
184 * 5732: function noRecordsFromUnallowedTables($inList)
185 * 5758: function notifyStageChange($stat,$stageId,$table,$id,$comment)
186 * 5853: function notifyStageChange_getEmails($listOfUsers,$noTablePrefix=FALSE)
187 *
188 * SECTION: Clearing cache
189 * 5899: function clear_cache($table,$uid)
190 * 6009: function clear_cacheCmd($cacheCmd)
191 *
192 * SECTION: Logging
193 * 6113: function log($table,$recuid,$action,$recpid,$error,$details,$details_nr=-1,$data=array(),$event_pid=-1,$NEWid='')
194 * 6130: function newlog($message, $error=0)
195 * 6140: function printLogErrorMessages($redirect)
196 *
197 * SECTION: Internal (do not use outside Core!)
198 * 6202: function internal_clearPageCache()
199 *
200 * TOTAL FUNCTIONS: 126
201 * (This index is automatically created/updated by the extension "extdeveval")
202 *
203 */
204
205
206
207
208 // *******************************
209 // Including necessary libraries
210 // *******************************
211 require_once (PATH_t3lib.'class.t3lib_loaddbgroup.php');
212 require_once (PATH_t3lib.'class.t3lib_parsehtml_proc.php');
213 require_once (PATH_t3lib.'class.t3lib_stdgraphic.php');
214 require_once (PATH_t3lib.'class.t3lib_basicfilefunc.php');
215 require_once (PATH_t3lib.'class.t3lib_refindex.php');
216 require_once (PATH_t3lib.'class.t3lib_flexformtools.php');
217
218
219
220
221
222
223
224
225
226
227
228 /**
229 * This is the TYPO3 Core Engine class for manipulation of the database
230 * This class is used by eg. the tce_db.php script which provides an the interface for POST forms to this class.
231 *
232 * Dependencies:
233 * - $GLOBALS['TCA'] must exist
234 * - $GLOBALS['LANG'] must exist
235 *
236 * tce_db.php for further comments and SYNTAX! Also see document 'TYPO3 Core API' for details.
237 *
238 * @author Kasper Skaarhoj <kasperYYYY@typo3.com>
239 * @package TYPO3
240 * @subpackage t3lib
241 */
242 class t3lib_TCEmain {
243
244
245 // *********************
246 // Public variables you can configure before using the class:
247 // *********************
248
249 var $storeLogMessages = TRUE; // Boolean: If true, the default log-messages will be stored. This should not be necessary if the locallang-file for the log-display is properly configured. So disabling this will just save some database-space as the default messages are not saved.
250 var $enableLogging = TRUE; // Boolean: If true, actions are logged to sys_log.
251 var $reverseOrder = FALSE; // Boolean: If true, the datamap array is reversed in the order, which is a nice thing if you're creating a whole new bunch of records.
252 var $checkSimilar = TRUE; // Boolean: If true, only fields which are different from the database values are saved! In fact, if a whole input array is similar, it's not saved then.
253 var $stripslashes_values = TRUE; // Boolean: If true, incoming values in the data-array have their slashes stripped. ALWAYS SET THIS TO ZERO and supply an unescaped data array instead. This switch may totally disappear in future versions of this class!
254 var $checkStoredRecords = TRUE; // Boolean: This will read the record after having updated or inserted it. If anything is not properly submitted an error is written to the log. This feature consumes extra time by selecting records
255 var $checkStoredRecords_loose = TRUE; // Boolean: If set, values '' and 0 will equal each other when the stored records are checked.
256 var $deleteTree = FALSE; // Boolean. If this is set, then a page is deleted by deleting the whole branch under it (user must have deletepermissions to it all). If not set, then the page is deleted ONLY if it has no branch
257 var $neverHideAtCopy = FALSE; // Boolean. If set, then the 'hideAtCopy' flag for tables will be ignored.
258 var $dontProcessTransformations = FALSE; // Boolean: If set, then transformations are NOT performed on the input.
259 var $clear_flexFormData_vDEFbase = FALSE; // Boolean: If set, .vDEFbase values are unset in flexforms.
260 var $updateModeL10NdiffData = TRUE; // Boolean/Mixed: TRUE: (traditional) Updates when record is saved. For flexforms, updates if change is made to the localized value. FALSE: Will not update anything. "FORCE_FFUPD" (string): Like TRUE, but will force update to the FlexForm Field
261 var $bypassWorkspaceRestrictions = FALSE; // Boolean: If true, workspace restrictions are bypassed on edit an create actions (process_datamap()). YOU MUST KNOW what you do if you use this feature!
262 var $bypassFileHandling = FALSE; // Boolean: If true, file handling of attached files (addition, deletion etc) is bypassed - the value is saved straight away. YOU MUST KNOW what you are doing with this feature!
263 var $bypassAccessCheckForRecords = FALSE; // Boolean: If true, access check, check for deleted etc. for records is bypassed. YOU MUST KNOW what you are doing if you use this feature!
264
265 var $copyWhichTables = '*'; // String. Comma-list. This list of tables decides which tables will be copied. If empty then none will. If '*' then all will (that the user has permission to of course)
266 var $generalComment = ''; // General comment, eg. for staging in workspaces.
267
268 var $copyTree = 0; // Integer. If 0 then branch is NOT copied. If 1 then pages on the 1st level is copied. If 2 then pages on the second level is copied ... and so on
269
270 var $defaultValues = array(); // Array [table][fields]=value: New records are created with default values and you can set this array on the form $defaultValues[$table][$field] = $value to override the default values fetched from TCA. If ->setDefaultsFromUserTS is called UserTSconfig default values will overrule existing values in this array (thus UserTSconfig overrules externally set defaults which overrules TCA defaults)
271 var $overrideValues = array(); // Array [table][fields]=value: You can set this array on the form $overrideValues[$table][$field] = $value to override the incoming data. You must set this externally. You must make sure the fields in this array are also found in the table, because it's not checked. All columns can be set by this array!
272 var $alternativeFileName = array(); // Array [filename]=alternative_filename: Use this array to force another name onto a file. Eg. if you set ['/tmp/blablabal'] = 'my_file.txt' and '/tmp/blablabal' is set for a certain file-field, then 'my_file.txt' will be used as the name instead.
273 var $data_disableFields=array(); // If entries are set in this array corresponding to fields for update, they are ignored and thus NOT updated. You could set this array from a series of checkboxes with value=0 and hidden fields before the checkbox with 1. Then an empty checkbox will disable the field.
274 var $suggestedInsertUids=array(); // Use this array to validate suggested uids for tables by setting [table]:[uid]. This is a dangerous option since it will force the inserted record to have a certain UID. The value just have to be true, but if you set it to "DELETE" it will make sure any record with that UID will be deleted first (raw delete). The option is used for import of T3D files when synchronizing between two mirrored servers. As a security measure this feature is available only for Admin Users (for now)
275
276 var $callBackObj; // Object. Call back object for flex form traversation. Useful when external classes wants to use the iteration functions inside tcemain for traversing a FlexForm structure.
277
278
279
280
281 // *********************
282 // Internal variables (mapping arrays) which can be used (read-only) from outside
283 // *********************
284 var $autoVersionIdMap = Array(); // Contains mapping of auto-versionized records.
285 var $substNEWwithIDs = Array(); // When new elements are created, this array contains a map between their "NEW..." string IDs and the eventual UID they got when stored in database
286 var $substNEWwithIDs_table = Array(); // Like $substNEWwithIDs, but where each old "NEW..." id is mapped to the table it was from.
287 var $newRelatedIDs = Array(); // Holds the tables and there the ids of newly created child records from IRRE
288 var $copyMappingArray_merged = Array(); // This array is the sum of all copying operations in this class. May be READ from outside, thus partly public.
289 var $copiedFileMap = Array(); // A map between input file name and final destination for files being attached to records.
290 var $RTEmagic_copyIndex = Array(); // Contains [table][id][field] of fiels where RTEmagic images was copied. Holds old filename as key and new filename as value.
291 var $errorLog = Array(); // Errors are collected in this variable.
292 var $accumulateForNotifEmail = Array(); // For accumulating information about workspace stages raised on elements so a single mail is sent as notification.
293
294
295
296 // *********************
297 // Internal Variables, do not touch.
298 // *********************
299
300 // Variables set in init() function:
301 /**
302 * The user-object the script uses. If not set from outside, this is set to the current global $BE_USER.
303 *
304 * @var t3lib_beUserAuth
305 */
306 var $BE_USER;
307 var $userid; // will be set to uid of be_user executing this script
308 var $username; // will be set to username of be_user executing this script
309 var $admin; // will be set if user is admin
310
311 var $defaultPermissions = array( // Can be overridden from $TYPO3_CONF_VARS
312 'user' => 'show,edit,delete,new,editcontent',
313 'group' => 'show,edit,new,editcontent',
314 'everybody' => ''
315 );
316
317 var $exclude_array; // The list of <table>-<fields> that cannot be edited by user. This is compiled from TCA/exclude-flag combined with non_exclude_fields for the user.
318 var $datamap = Array(); // Set with incoming data array
319 var $cmdmap = Array(); // Set with incoming cmd array
320
321 // Internal static:
322 var $pMap = Array( // Permission mapping
323 'show' => 1, // 1st bit
324 'edit' => 2, // 2nd bit
325 'delete' => 4, // 3rd bit
326 'new' => 8, // 4th bit
327 'editcontent' => 16 // 5th bit
328 );
329 var $sortIntervals = 256; // Integer: The interval between sorting numbers used with tables with a 'sorting' field defined. Min 1
330
331 // Internal caching arrays
332 var $recUpdateAccessCache = Array(); // Used by function checkRecordUpdateAccess() to store whether a record is updateable or not.
333 var $recInsertAccessCache = Array(); // User by function checkRecordInsertAccess() to store whether a record can be inserted on a page id
334 var $isRecordInWebMount_Cache=array(); // Caching array for check of whether records are in a webmount
335 var $isInWebMount_Cache=array(); // Caching array for page ids in webmounts
336 var $cachedTSconfig = array(); // Caching for collecting TSconfig for page ids
337 var $pageCache = Array(); // Used for caching page records in pageInfo()
338 var $checkWorkspaceCache = Array(); // Array caching workspace access for BE_USER
339
340 // Other arrays:
341 var $dbAnalysisStore=array(); // For accumulation of MM relations that must be written after new records are created.
342 var $removeFilesStore=array(); // For accumulation of files which must be deleted after processing of all input content
343 var $uploadedFileArray = array(); // Uploaded files, set by process_uploads()
344 var $registerDBList=array(); // Used for tracking references that might need correction after operations
345 var $registerDBPids=array(); // Used for tracking references that might need correction in pid field after operations (e.g. IRRE)
346 var $copyMappingArray = Array(); // Used by the copy action to track the ids of new pages so subpages are correctly inserted! THIS is internally cleared for each executed copy operation! DO NOT USE THIS FROM OUTSIDE! Read from copyMappingArray_merged instead which is accumulating this information.
347 var $remapStack = array(); // array used for remapping uids and values at the end of process_datamap
348 var $remapStackRecords = array(); // array used for remapping uids and values at the end of process_datamap (e.g. $remapStackRecords[<table>][<uid>] = <index in $remapStack>)
349 var $updateRefIndexStack = array(); // array used for additional calls to $this->updateRefIndex
350 var $callFromImpExp = false; // tells, that this TCEmain was called from tx_impext - this variable is set by tx_impexp
351 var $newIndexMap = array(); // Array for new flexform index mapping
352
353 // Various
354 /**
355 * basicFileFunctions object
356 *
357 * @var t3lib_basicFileFunctions
358 */
359 var $fileFunc; // For "singleTon" file-manipulation object
360 var $checkValue_currentRecord=array(); // Set to "currentRecord" during checking of values.
361 var $autoVersioningUpdate = FALSE; // A signal flag used to tell file processing that autoversioning has happend and hence certain action should be applied.
362
363
364
365
366
367
368
369
370
371
372
373
374 /**
375 * Initializing.
376 * For details, see 'TYPO3 Core API' document.
377 * This function does not start the processing of data, but merely initializes the object
378 *
379 * @param array Data to be modified or inserted in the database
380 * @param array Commands to copy, move, delete, localize, versionize records.
381 * @param object An alternative userobject you can set instead of the default, which is $GLOBALS['BE_USER']
382 * @return void
383 */
384 function start($data,$cmd,$altUserObject='') {
385
386 // Initializing BE_USER
387 $this->BE_USER = is_object($altUserObject) ? $altUserObject : $GLOBALS['BE_USER'];
388 $this->userid = $this->BE_USER->user['uid'];
389 $this->username = $this->BE_USER->user['username'];
390 $this->admin = $this->BE_USER->user['admin'];
391
392 if ($GLOBALS['BE_USER']->uc['recursiveDelete']) {
393 $this->deleteTree = 1;
394 }
395
396 if ($GLOBALS['TYPO3_CONF_VARS']['BE']['explicitConfirmationOfTranslation'] && $this->updateModeL10NdiffData===TRUE) {
397 $this->updateModeL10NdiffData = FALSE;
398 }
399
400 // Initializing default permissions for pages
401 $defaultPermissions = $GLOBALS['TYPO3_CONF_VARS']['BE']['defaultPermissions'];
402 if (isset($defaultPermissions['user'])) {$this->defaultPermissions['user'] = $defaultPermissions['user'];}
403 if (isset($defaultPermissions['group'])) {$this->defaultPermissions['group'] = $defaultPermissions['group'];}
404 if (isset($defaultPermissions['everybody'])) {$this->defaultPermissions['everybody'] = $defaultPermissions['everybody'];}
405
406 // generates the excludelist, based on TCA/exclude-flag and non_exclude_fields for the user:
407 $this->exclude_array = $this->admin ? array() : $this->getExcludeListArray();
408
409 // Setting the data and cmd arrays
410 if (is_array($data)) {
411 reset($data);
412 $this->datamap = $data;
413 }
414 if (is_array($cmd)) {
415 reset($cmd);
416 $this->cmdmap = $cmd;
417 }
418 }
419
420 /**
421 * Function that can mirror input values in datamap-array to other uid numbers.
422 * Example: $mirror[table][11] = '22,33' will look for content in $this->datamap[table][11] and copy it to $this->datamap[table][22] and $this->datamap[table][33]
423 *
424 * @param array This array has the syntax $mirror[table_name][uid] = [list of uids to copy data-value TO!]
425 * @return void
426 */
427 function setMirror($mirror) {
428 if (is_array($mirror)) {
429 reset($mirror);
430 while(list($table,$uid_array)=each($mirror)) {
431 if (isset($this->datamap[$table])) {
432 reset($uid_array);
433 while (list($id,$uidList) = each($uid_array)) {
434 if (isset($this->datamap[$table][$id])) {
435 $theIdsInArray = t3lib_div::trimExplode(',',$uidList,1);
436 while(list(,$copyToUid)=each($theIdsInArray)) {
437 $this->datamap[$table][$copyToUid] = $this->datamap[$table][$id];
438 }
439 }
440 }
441 }
442 }
443 }
444 }
445
446 /**
447 * Initializes default values coming from User TSconfig
448 *
449 * @param array User TSconfig array
450 * @return void
451 */
452 function setDefaultsFromUserTS($userTS) {
453 global $TCA;
454 if (is_array($userTS)) {
455 foreach($userTS as $k => $v) {
456 $k = substr($k,0,-1);
457 if ($k && is_array($v) && isset($TCA[$k])) {
458 if (is_array($this->defaultValues[$k])) {
459 $this->defaultValues[$k] = array_merge($this->defaultValues[$k],$v);
460 } else {
461 $this->defaultValues[$k] = $v;
462 }
463 }
464 }
465 }
466 }
467
468 /**
469 * Processing of uploaded files.
470 * It turns out that some versions of PHP arranges submitted data for files different if sent in an array. This function will unify this so the internal array $this->uploadedFileArray will always contain files arranged in the same structure.
471 *
472 * @param array $_FILES array
473 * @return void
474 */
475 function process_uploads($postFiles) {
476
477 if (is_array($postFiles)) {
478
479 // Editing frozen:
480 if ($this->BE_USER->workspace!==0 && $this->BE_USER->workspaceRec['freeze']) {
481 $this->newlog('All editing in this workspace has been frozen!',1);
482 return FALSE;
483 }
484
485 reset($postFiles);
486 $subA = current($postFiles);
487 if (is_array($subA)) {
488 if (is_array($subA['name']) && is_array($subA['type']) && is_array($subA['tmp_name']) && is_array($subA['size'])) {
489 // Initialize the uploadedFilesArray:
490 $this->uploadedFileArray=array();
491
492 // For each entry:
493 foreach($subA as $key => $values) {
494 $this->process_uploads_traverseArray($this->uploadedFileArray,$values,$key);
495 }
496 } else {
497 $this->uploadedFileArray=$subA;
498 }
499 }
500 }
501 }
502
503 /**
504 * Traverse the upload array if needed to rearrange values.
505 *
506 * @param array $this->uploadedFileArray passed by reference
507 * @param array Input array ($_FILES parts)
508 * @param string The current $_FILES array key to set on the outermost level.
509 * @return void
510 * @access private
511 * @see process_uploads()
512 */
513 function process_uploads_traverseArray(&$outputArr,$inputArr,$keyToSet) {
514 if (is_array($inputArr)) {
515 foreach($inputArr as $key => $value) {
516 $this->process_uploads_traverseArray($outputArr[$key],$inputArr[$key],$keyToSet);
517 }
518 } else {
519 $outputArr[$keyToSet]=$inputArr;
520 }
521 }
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537 /*********************************************
538 *
539 * HOOKS
540 *
541 *********************************************/
542
543 /**
544 * Hook: processDatamap_afterDatabaseOperations
545 * (calls $hookObj->processDatamap_afterDatabaseOperations($status, $table, $id, $fieldArray, $this);)
546 *
547 * Note: When using the hook after INSERT operations, you will only get the temporary NEW... id passed to your hook as $id,
548 * but you can easily translate it to the real uid of the inserted record using the $this->substNEWwithIDs array.
549 *
550 * @param object $hookObjectsArr: (reference) Array with hook objects
551 * @param string $status: (reference) Status of the current operation, 'new' or 'update
552 * @param string $table: (refrence) The table currently processing data for
553 * @param string $id: (reference) The record uid currently processing data for, [integer] or [string] (like 'NEW...')
554 * @param array $fieldArray: (reference) The field array of a record
555 * @return void
556 */
557 function hook_processDatamap_afterDatabaseOperations(&$hookObjectsArr, &$status, &$table, &$id, &$fieldArray) {
558 // Process hook directly:
559 if (!isset($this->remapStackRecords[$table][$id])) {
560 foreach($hookObjectsArr as $hookObj) {
561 if (method_exists($hookObj, 'processDatamap_afterDatabaseOperations')) {
562 $hookObj->processDatamap_afterDatabaseOperations($status, $table, $id, $fieldArray, $this);
563 }
564 }
565 // If this record is in remapStack (e.g. when using IRRE), values will be updated/remapped later on. So the hook will also be called later:
566 } else {
567 $this->remapStackRecords[$table][$id]['processDatamap_afterDatabaseOperations'] = array(
568 'status' => $status,
569 'fieldArray' => $fieldArray,
570 'hookObjectsArr' => $hookObjectsArr,
571 );
572 }
573 }
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588 /*********************************************
589 *
590 * PROCESSING DATA
591 *
592 *********************************************/
593
594 /**
595 * Processing the data-array
596 * Call this function to process the data-array set by start()
597 *
598 * @return void
599 */
600 function process_datamap() {
601 global $TCA, $TYPO3_CONF_VARS;
602 // Keep versionized(!) relations here locally:
603 $registerDBList = array();
604
605 // Editing frozen:
606 if ($this->BE_USER->workspace!==0 && $this->BE_USER->workspaceRec['freeze']) {
607 $this->newlog('All editing in this workspace has been frozen!',1);
608 return FALSE;
609 }
610
611 // First prepare user defined objects (if any) for hooks which extend this function:
612 $hookObjectsArr = array();
613 if (is_array ($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_tcemain.php']['processDatamapClass'])) {
614 foreach ($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_tcemain.php']['processDatamapClass'] as $classRef) {
615 $hookObjectsArr[] = &t3lib_div::getUserObj($classRef);
616 }
617 }
618
619 // Organize tables so that the pages-table is always processed first. This is required if you want to make sure that content pointing to a new page will be created.
620 $orderOfTables = Array();
621 if (isset($this->datamap['pages'])) { // Set pages first.
622 $orderOfTables[]='pages';
623 }
624 reset($this->datamap);
625 while (list($table,) = each($this->datamap)) {
626 if ($table!='pages') {
627 $orderOfTables[]=$table;
628 }
629 }
630
631 // Process the tables...
632 foreach($orderOfTables as $table) {
633 /* Check if
634 - table is set in $TCA,
635 - table is NOT readOnly
636 - the table is set with content in the data-array (if not, there's nothing to process...)
637 - permissions for tableaccess OK
638 */
639 $modifyAccessList = $this->checkModifyAccessList($table);
640 if (!$modifyAccessList) {
641 $id = 0;
642 $this->log($table,$id,2,0,1,"Attempt to modify table '%s' without permission",1,array($table));
643 }
644 if (isset($TCA[$table]) && !$this->tableReadOnly($table) && is_array($this->datamap[$table]) && $modifyAccessList) {
645 if ($this->reverseOrder) {
646 $this->datamap[$table] = array_reverse($this->datamap[$table], 1);
647 }
648
649 // For each record from the table, do:
650 // $id is the record uid, may be a string if new records...
651 // $incomingFieldArray is the array of fields
652 foreach($this->datamap[$table] as $id => $incomingFieldArray) {
653 if (is_array($incomingFieldArray)) {
654
655 // Hook: processDatamap_preProcessIncomingFieldArray
656 foreach($hookObjectsArr as $hookObj) {
657 if (method_exists($hookObj, 'processDatamap_preProcessFieldArray')) {
658 $hookObj->processDatamap_preProcessFieldArray($incomingFieldArray, $table, $id, $this);
659 }
660 }
661
662 // ******************************
663 // Checking access to the record
664 // ******************************
665 $createNewVersion = FALSE;
666 $recordAccess = FALSE;
667 $old_pid_value = '';
668 $resetRejected = FALSE;
669 $this->autoVersioningUpdate = FALSE;
670
671 if (!t3lib_div::testInt($id)) { // Is it a new record? (Then Id is a string)
672 $fieldArray = $this->newFieldArray($table); // Get a fieldArray with default values
673 if (isset($incomingFieldArray['pid'])) { // A pid must be set for new records.
674 // $value = the pid
675 $pid_value = $incomingFieldArray['pid'];
676
677 // Checking and finding numerical pid, it may be a string-reference to another value
678 $OK = 1;
679 if (strstr($pid_value,'NEW')) { // If a NEW... id
680 if (substr($pid_value,0,1)=='-') {$negFlag=-1;$pid_value=substr($pid_value,1);} else {$negFlag=1;}
681 if (isset($this->substNEWwithIDs[$pid_value])) { // Trying to find the correct numerical value as it should be mapped by earlier processing of another new record.
682 $old_pid_value = $pid_value;
683 $pid_value=intval($negFlag*$this->substNEWwithIDs[$pid_value]);
684 } else {$OK = 0;} // If not found in the substArray we must stop the process...
685 } elseif ($pid_value>=0 && $this->BE_USER->workspace!==0 && $TCA[$table]['ctrl']['versioning_followPages']) { // PID points to page, the workspace is an offline space and the table follows page during versioning: This means we must check if the PID page has a version in the workspace with swapmode set to 0 (zero = page+content) and if so, change the pid to the uid of that version.
686 if ($WSdestPage = t3lib_BEfunc::getWorkspaceVersionOfRecord($this->BE_USER->workspace, 'pages', $pid_value, 'uid,t3ver_swapmode')) { // Looks for workspace version of page.
687 if ($WSdestPage['t3ver_swapmode']==0) { // if swapmode is zero, then change pid value.
688 $pid_value = $WSdestPage['uid'];
689 }
690 }
691 }
692 $pid_value = intval($pid_value);
693
694 // The $pid_value is now the numerical pid at this point
695 if ($OK) {
696 $sortRow = $TCA[$table]['ctrl']['sortby'];
697 if ($pid_value>=0) { // Points to a page on which to insert the element, possibly in the top of the page
698 if ($sortRow) { // If this table is sorted we better find the top sorting number
699 $fieldArray[$sortRow] = $this->getSortNumber($table,0,$pid_value);
700 }
701 $fieldArray['pid'] = $pid_value; // The numerical pid is inserted in the data array
702 } else { // points to another record before ifself
703 if ($sortRow) { // If this table is sorted we better find the top sorting number
704 $tempArray=$this->getSortNumber($table,0,$pid_value); // Because $pid_value is < 0, getSortNumber returns an array
705 $fieldArray['pid'] = $tempArray['pid'];
706 $fieldArray[$sortRow] = $tempArray['sortNumber'];
707 } else { // Here we fetch the PID of the record that we point to...
708 $tempdata = $this->recordInfo($table,abs($pid_value),'pid');
709 $fieldArray['pid']=$tempdata['pid'];
710 }
711 }
712 }
713 }
714 $theRealPid = $fieldArray['pid'];
715
716 // Now, check if we may insert records on this pid.
717 if ($theRealPid>=0) {
718 $recordAccess = $this->checkRecordInsertAccess($table,$theRealPid); // Checks if records can be inserted on this $pid.
719 if ($recordAccess) {
720 $this->addDefaultPermittedLanguageIfNotSet($table,$incomingFieldArray);
721 $recordAccess = $this->BE_USER->recordEditAccessInternals($table,$incomingFieldArray,TRUE);
722 if (!$recordAccess) {
723 $this->newlog("recordEditAccessInternals() check failed. [".$this->BE_USER->errorMsg."]",1);
724 } elseif(!$this->bypassWorkspaceRestrictions) {
725 // Workspace related processing:
726 if ($res = $this->BE_USER->workspaceAllowLiveRecordsInPID($theRealPid,$table)) { // If LIVE records cannot be created in the current PID due to workspace restrictions, prepare creation of placeholder-record
727 if ($res<0) {
728 $recordAccess = FALSE;
729 $this->newlog('Stage for versioning root point and users access level did not allow for editing',1);
730 }
731 } else { // So, if no live records were allowed, we have to create a new version of this record:
732 if ($TCA[$table]['ctrl']['versioningWS']) {
733 $createNewVersion = TRUE;
734 } else {
735 $recordAccess = FALSE;
736 $this->newlog('Record could not be created in this workspace in this branch',1);
737 }
738 }
739 }
740 }
741 } else {
742 debug('Internal ERROR: pid should not be less than zero!');
743 }
744 $status = 'new'; // Yes new record, change $record_status to 'insert'
745 } else { // Nope... $id is a number
746 $fieldArray = array();
747 $recordAccess = $this->checkRecordUpdateAccess($table,$id);
748 if (!$recordAccess) {
749 $propArr = $this->getRecordProperties($table,$id);
750 $this->log($table,$id,2,0,1,"Attempt to modify record '%s' (%s) without permission. Or non-existing page.",2,array($propArr['header'],$table.':'.$id),$propArr['event_pid']);
751 } else { // Next check of the record permissions (internals)
752 $recordAccess = $this->BE_USER->recordEditAccessInternals($table,$id);
753 if (!$recordAccess) {
754 $propArr = $this->getRecordProperties($table,$id);
755 $this->newlog("recordEditAccessInternals() check failed. [".$this->BE_USER->errorMsg."]",1);
756 } else { // Here we fetch the PID of the record that we point to...
757 $tempdata = $this->recordInfo($table,$id,'pid'.($TCA[$table]['ctrl']['versioningWS']?',t3ver_wsid,t3ver_stage':''));
758 $theRealPid = $tempdata['pid'];
759
760 // Prepare the reset of the rejected flag if set:
761 if ($TCA[$table]['ctrl']['versioningWS'] && $tempdata['t3ver_stage']<0) {
762 $resetRejected = TRUE;
763 }
764
765 // Use the new id of the versionized record we're trying to write to:
766 // (This record is a child record of a parent and has already been versionized.)
767 if ($this->autoVersionIdMap[$table][$id]) {
768 // For the reason that creating a new version of this record, automatically
769 // created related child records (e.g. "IRRE"), update the accordant field:
770 $this->getVersionizedIncomingFieldArray($table, $id, $incomingFieldArray, $registerDBList);
771
772 // Use the new id of the copied/versionized record:
773 $id = $this->autoVersionIdMap[$table][$id];
774 $recordAccess = TRUE;
775 $this->autoVersioningUpdate = TRUE;
776
777 // Checking access in case of offline workspace:
778 } elseif (!$this->bypassWorkspaceRestrictions && $errorCode = $this->BE_USER->workspaceCannotEditRecord($table,$tempdata)) {
779 $recordAccess = FALSE; // Versioning is required and it must be offline version!
780
781 // Auto-creation of version: In offline workspace, test if versioning is enabled and look for workspace version of input record. If there is no versionized record found we will create one and save to that.
782 if ($this->BE_USER->workspaceAllowAutoCreation($table,$id,$theRealPid)) {
783 $tce = t3lib_div::makeInstance('t3lib_TCEmain');
784 /* @var $tce t3lib_TCEmain */
785 $tce->stripslashes_values = 0;
786
787 // Setting up command for creating a new version of the record:
788 $cmd = array();
789 $cmd[$table][$id]['version'] = array(
790 'action' => 'new',
791 'treeLevels' => -1, // Default is to create a version of the individual records... element versioning that is.
792 'label' => 'Auto-created for WS #'.$this->BE_USER->workspace
793 );
794 $tce->start(array(),$cmd);
795 $tce->process_cmdmap();
796 $this->errorLog = array_merge($this->errorLog,$tce->errorLog);
797
798 // If copying was successful, share the new uids (also of related children):
799 if ($tce->copyMappingArray[$table][$id]) {
800 foreach ($tce->copyMappingArray as $origTable => $origIdArray) {
801 foreach ($origIdArray as $origId => $newId) {
802 $this->uploadedFileArray[$origTable][$newId] = $this->uploadedFileArray[$origTable][$origId];
803 $this->autoVersionIdMap[$origTable][$origId] = $newId;
804 }
805 }
806 $this->RTEmagic_copyIndex = t3lib_div::array_merge_recursive_overrule($this->RTEmagic_copyIndex, $tce->RTEmagic_copyIndex); // See where RTEmagic_copyIndex is used inside fillInFieldArray() for more information...
807
808 // Update registerDBList, that holds the copied relations to child records:
809 $registerDBList = array_merge($registerDBList, $tce->registerDBList);
810 // For the reason that creating a new version of this record, automatically
811 // created related child records (e.g. "IRRE"), update the accordant field:
812 $this->getVersionizedIncomingFieldArray($table, $id, $incomingFieldArray, $registerDBList);
813
814 // Use the new id of the copied/versionized record:
815 $id = $this->autoVersionIdMap[$table][$id];
816 $recordAccess = TRUE;
817 $this->autoVersioningUpdate = TRUE;
818 } else $this->newlog("Could not be edited in offline workspace in the branch where found (failure state: '".$errorCode."'). Auto-creation of version failed!",1);
819 } else $this->newlog("Could not be edited in offline workspace in the branch where found (failure state: '".$errorCode."'). Auto-creation of version not allowed in workspace!",1);
820 }
821 }
822 }
823 $status = 'update'; // the default is 'update'
824 }
825
826 // If access was granted above, proceed to create or update record:
827 if ($recordAccess) {
828
829 list($tscPID) = t3lib_BEfunc::getTSCpid($table,$id,$old_pid_value ? $old_pid_value : $fieldArray['pid']); // Here the "pid" is set IF NOT the old pid was a string pointing to a place in the subst-id array.
830 $TSConfig = $this->getTCEMAIN_TSconfig($tscPID);
831 if ($status=='new' && $table=='pages' && is_array($TSConfig['permissions.'])) {
832 $fieldArray = $this->setTSconfigPermissions($fieldArray,$TSConfig['permissions.']);
833 }
834 if ($createNewVersion) {
835 $newVersion_placeholderFieldArray = $fieldArray;
836 }
837
838 // Processing of all fields in incomingFieldArray and setting them in $fieldArray
839 $fieldArray = $this->fillInFieldArray($table,$id,$fieldArray,$incomingFieldArray,$theRealPid,$status,$tscPID);
840
841 // NOTICE! All manipulation beyond this point bypasses both "excludeFields" AND possible "MM" relations / file uploads to field!
842
843 // Forcing some values unto field array:
844 $fieldArray = $this->overrideFieldArray($table,$fieldArray); // NOTICE: This overriding is potentially dangerous; permissions per field is not checked!!!
845 if ($createNewVersion) {
846 $newVersion_placeholderFieldArray = $this->overrideFieldArray($table,$newVersion_placeholderFieldArray);
847 }
848
849 // Setting system fields
850 if ($status=='new') {
851 if ($TCA[$table]['ctrl']['crdate']) {
852 $fieldArray[$TCA[$table]['ctrl']['crdate']]=time();
853 if ($createNewVersion) $newVersion_placeholderFieldArray[$TCA[$table]['ctrl']['crdate']]=time();
854 }
855 if ($TCA[$table]['ctrl']['cruser_id']) {
856 $fieldArray[$TCA[$table]['ctrl']['cruser_id']]=$this->userid;
857 if ($createNewVersion) $newVersion_placeholderFieldArray[$TCA[$table]['ctrl']['cruser_id']]=$this->userid;
858 }
859 } elseif ($this->checkSimilar) { // Removing fields which are equal to the current value:
860 $fieldArray = $this->compareFieldArrayWithCurrentAndUnset($table,$id,$fieldArray);
861 }
862 if ($TCA[$table]['ctrl']['tstamp'] && count($fieldArray)) {
863 $fieldArray[$TCA[$table]['ctrl']['tstamp']]=time();
864 if ($createNewVersion) $newVersion_placeholderFieldArray[$TCA[$table]['ctrl']['tstamp']]=time();
865 }
866 if ($resetRejected) {
867 $fieldArray['t3ver_stage'] = 0;
868 }
869
870 // Hook: processDatamap_postProcessFieldArray
871 foreach($hookObjectsArr as $hookObj) {
872 if (method_exists($hookObj, 'processDatamap_postProcessFieldArray')) {
873 $hookObj->processDatamap_postProcessFieldArray($status, $table, $id, $fieldArray, $this);
874 }
875 }
876
877 // Performing insert/update. If fieldArray has been unset by some userfunction (see hook above), don't do anything
878 // Kasper: Unsetting the fieldArray is dangerous; MM relations might be saved already and files could have been uploaded that are now "lost"
879 if (is_array($fieldArray)) {
880 if ($status=='new') {
881 if ($createNewVersion) { // This creates a new version of the record with online placeholder and offline version
882 $versioningType = $table==='pages' ? $this->BE_USER->workspaceVersioningTypeGetClosest(t3lib_div::intInRange($TYPO3_CONF_VARS['BE']['newPagesVersioningType'],-1,1)) : -1;
883 if ($this->BE_USER->workspaceVersioningTypeAccess($versioningType)) {
884 $newVersion_placeholderFieldArray['t3ver_label'] = 'INITIAL PLACEHOLDER';
885 $newVersion_placeholderFieldArray['t3ver_state'] = 1; // Setting placeholder state value for temporary record
886 $newVersion_placeholderFieldArray['t3ver_wsid'] = $this->BE_USER->workspace; // Setting workspace - only so display of place holders can filter out those from other workspaces.
887 $newVersion_placeholderFieldArray[$TCA[$table]['ctrl']['label']] = '[PLACEHOLDER, WS#'.$this->BE_USER->workspace.']';
888 $this->insertDB($table,$id,$newVersion_placeholderFieldArray,FALSE); // Saving placeholder as 'original'
889
890 // For the actual new offline version, set versioning values to point to placeholder:
891 $fieldArray['pid'] = -1;
892 $fieldArray['t3ver_oid'] = $this->substNEWwithIDs[$id];
893 $fieldArray['t3ver_id'] = 1;
894 $fieldArray['t3ver_state'] = -1; // Setting placeholder state value for version (so it can know it is currently a new version...)
895 $fieldArray['t3ver_label'] = 'First draft version';
896 $fieldArray['t3ver_wsid'] = $this->BE_USER->workspace;
897 if ($table==='pages') { // Swap mode set to "branch" so we can build branches for pages.
898 $fieldArray['t3ver_swapmode'] = $versioningType;
899 }
900 $phShadowId = $this->insertDB($table,$id,$fieldArray,TRUE,0,TRUE); // When inserted, $this->substNEWwithIDs[$id] will be changed to the uid of THIS version and so the interface will pick it up just nice!
901 if ($phShadowId) {
902 $this->placeholderShadowing($table,$phShadowId);
903 // Hold auto-versionized ids of placeholders:
904 $this->autoVersionIdMap[$table][$this->substNEWwithIDs[$id]] = $phShadowId;
905 }
906 } else $this->newlog('Versioning type "'.$versioningType.'" was not allowed, so could not create new record.',1);
907 } else {
908 $this->insertDB($table,$id,$fieldArray,FALSE,$incomingFieldArray['uid']);
909 }
910 } else {
911 $this->updateDB($table,$id,$fieldArray);
912 $this->placeholderShadowing($table,$id);
913 }
914 }
915
916 /*
917 * Hook: processDatamap_afterDatabaseOperations
918 *
919 * Note: When using the hook after INSERT operations, you will only get the temporary NEW... id passed to your hook as $id,
920 * but you can easily translate it to the real uid of the inserted record using the $this->substNEWwithIDs array.
921 */
922 $this->hook_processDatamap_afterDatabaseOperations($hookObjectsArr, $status, $table, $id, $fieldArray);
923 } // if ($recordAccess) {
924 } // if (is_array($incomingFieldArray)) {
925 }
926 }
927 }
928
929 // Process the stack of relations to remap/correct
930 $this->processRemapStack();
931 $this->dbAnalysisStoreExec();
932 $this->removeRegisteredFiles();
933
934 /*
935 * Hook: processDatamap_afterAllOperations
936 *
937 * Note: When this hook gets called, all operations on the submitted data have been finished.
938 */
939 foreach($hookObjectsArr as $hookObj) {
940 if (method_exists($hookObj, 'processDatamap_afterAllOperations')) {
941 $hookObj->processDatamap_afterAllOperations($this);
942 }
943 }
944 }
945
946 /**
947 * Fix shadowing of data in case we are editing a offline version of a live "New" placeholder record:
948 *
949 * @param string Table name
950 * @param integer Record uid
951 * @return void
952 */
953 function placeholderShadowing($table,$id) {
954 global $TCA;
955
956 t3lib_div::loadTCA($table);
957 if ($liveRec = t3lib_BEfunc::getLiveVersionOfRecord($table,$id,'*')) {
958 if ((int)$liveRec['t3ver_state']>0) {
959 $justStoredRecord = t3lib_BEfunc::getRecord($table,$id);
960 $newRecord = array();
961
962 $shadowCols = $TCA[$table]['ctrl']['shadowColumnsForNewPlaceholders'];
963 $shadowCols.= ','.$TCA[$table]['ctrl']['languageField'];
964 $shadowCols.= ','.$TCA[$table]['ctrl']['transOrigPointerField'];
965 $shadowCols.= ','.$TCA[$table]['ctrl']['type'];
966 $shadowCols.= ','.$TCA[$table]['ctrl']['label'];
967
968 $shadowColumns = array_unique(t3lib_div::trimExplode(',', $shadowCols,1));
969 foreach($shadowColumns as $fieldName) {
970 if (strcmp($justStoredRecord[$fieldName],$liveRec[$fieldName]) && isset($TCA[$table]['columns'][$fieldName]) && $fieldName!=='uid' && $fieldName!=='pid') {
971 $newRecord[$fieldName] = $justStoredRecord[$fieldName];
972 }
973 }
974
975 if (count($newRecord)) {
976 $this->newlog('Shadowing done on fields '.implode(',',array_keys($newRecord)).' in Placeholder record '.$table.':'.$liveRec['uid'].' (offline version UID='.$id.')');
977 $this->updateDB($table,$liveRec['uid'],$newRecord);
978 }
979 }
980 }
981 }
982
983 /**
984 * Filling in the field array
985 * $this->exclude_array is used to filter fields if needed.
986 *
987 * @param string Table name
988 * @param integer Record ID
989 * @param array Default values, Preset $fieldArray with 'pid' maybe (pid and uid will be not be overridden anyway)
990 * @param array $incomingFieldArray is which fields/values you want to set. There are processed and put into $fieldArray if OK
991 * @param integer The real PID value of the record. For updates, this is just the pid of the record. For new records this is the PID of the page where it is inserted.
992 * @param string $status = 'new' or 'update'
993 * @param integer $tscPID: TSconfig PID
994 * @return array Field Array
995 */
996 function fillInFieldArray($table,$id,$fieldArray,$incomingFieldArray,$realPid,$status,$tscPID) {
997 global $TCA;
998
999 // Initialize:
1000 t3lib_div::loadTCA($table);
1001 $originalLanguageRecord = NULL;
1002 $originalLanguage_diffStorage = NULL;
1003 $diffStorageFlag = FALSE;
1004
1005 // Setting 'currentRecord' and 'checkValueRecord':
1006 if (strstr($id,'NEW')) {
1007 $currentRecord = $checkValueRecord = $fieldArray; // must have the 'current' array - not the values after processing below...
1008
1009 // IF $incomingFieldArray is an array, overlay it.
1010 // The point is that when new records are created as copies with flex type fields there might be a field containing information about which DataStructure to use and without that information the flexforms cannot be correctly processed.... This should be OK since the $checkValueRecord is used by the flexform evaluation only anyways...
1011 if (is_array($incomingFieldArray) && is_array($checkValueRecord)) {
1012 $checkValueRecord = t3lib_div::array_merge_recursive_overrule($checkValueRecord, $incomingFieldArray);
1013 }
1014 } else {
1015 $currentRecord = $checkValueRecord = $this->recordInfo($table,$id,'*'); // We must use the current values as basis for this!
1016
1017 t3lib_BEfunc::fixVersioningPid($table,$currentRecord); // This is done to make the pid positive for offline versions; Necessary to have diff-view for pages_language_overlay in workspaces.
1018
1019 // Get original language record if available:
1020 if (is_array($currentRecord)
1021 && $TCA[$table]['ctrl']['transOrigDiffSourceField']
1022 && $TCA[$table]['ctrl']['languageField']
1023 && $currentRecord[$TCA[$table]['ctrl']['languageField']] > 0
1024 && $TCA[$table]['ctrl']['transOrigPointerField']
1025 && intval($currentRecord[$TCA[$table]['ctrl']['transOrigPointerField']]) > 0) {
1026
1027 $lookUpTable = $TCA[$table]['ctrl']['transOrigPointerTable'] ? $TCA[$table]['ctrl']['transOrigPointerTable'] : $table;
1028 $originalLanguageRecord = $this->recordInfo($lookUpTable,$currentRecord[$TCA[$table]['ctrl']['transOrigPointerField']],'*');
1029 t3lib_BEfunc::workspaceOL($lookUpTable,$originalLanguageRecord);
1030 $originalLanguage_diffStorage = unserialize($currentRecord[$TCA[$table]['ctrl']['transOrigDiffSourceField']]);
1031 }
1032 }
1033 $this->checkValue_currentRecord = $checkValueRecord;
1034
1035 /*
1036 In the following all incoming value-fields are tested:
1037 - Are the user allowed to change the field?
1038 - Is the field uid/pid (which are already set)
1039 - perms-fields for pages-table, then do special things...
1040 - If the field is nothing of the above and the field is configured in TCA, the fieldvalues are evaluated by ->checkValue
1041
1042 If everything is OK, the field is entered into $fieldArray[]
1043 */
1044 foreach($incomingFieldArray as $field => $fieldValue) {
1045 if (!in_array($table.'-'.$field, $this->exclude_array) && !$this->data_disableFields[$table][$id][$field]) { // The field must be editable.
1046
1047 // Checking if a value for language can be changed:
1048 $languageDeny = $TCA[$table]['ctrl']['languageField'] && !strcmp($TCA[$table]['ctrl']['languageField'], $field) && !$this->BE_USER->checkLanguageAccess($fieldValue);
1049
1050 if (!$languageDeny) {
1051 // Stripping slashes - will probably be removed the day $this->stripslashes_values is removed as an option...
1052 if ($this->stripslashes_values) {
1053 if (is_array($fieldValue)) {
1054 t3lib_div::stripSlashesOnArray($fieldValue);
1055 } else $fieldValue = stripslashes($fieldValue);
1056 }
1057
1058 switch ($field) {
1059 case 'uid':
1060 case 'pid':
1061 // Nothing happens, already set
1062 break;
1063 case 'perms_userid':
1064 case 'perms_groupid':
1065 case 'perms_user':
1066 case 'perms_group':
1067 case 'perms_everybody':
1068 // Permissions can be edited by the owner or the administrator
1069 if ($table=='pages' && ($this->admin || $status=='new' || $this->pageInfo($id,'perms_userid')==$this->userid) ) {
1070 $value=intval($fieldValue);
1071 switch($field) {
1072 case 'perms_userid':
1073 $fieldArray[$field]=$value;
1074 break;
1075 case 'perms_groupid':
1076 $fieldArray[$field]=$value;
1077 break;
1078 default:
1079 if ($value>=0 && $value<pow(2,5)) {
1080 $fieldArray[$field]=$value;
1081 }
1082 break;
1083 }
1084 }
1085 break;
1086 case 't3ver_oid':
1087 case 't3ver_id':
1088 case 't3ver_wsid':
1089 case 't3ver_state':
1090 case 't3ver_swapmode':
1091 case 't3ver_count':
1092 case 't3ver_stage':
1093 case 't3ver_tstamp':
1094 // t3ver_label is not here because it CAN be edited as a regular field!
1095 break;
1096 default:
1097 if (isset($TCA[$table]['columns'][$field])) {
1098 // Evaluating the value.
1099 $res = $this->checkValue($table,$field,$fieldValue,$id,$status,$realPid,$tscPID);
1100 if (isset($res['value'])) {
1101 $fieldArray[$field]=$res['value'];
1102
1103 // Add the value of the original record to the diff-storage content:
1104 if ($this->updateModeL10NdiffData && $TCA[$table]['ctrl']['transOrigDiffSourceField']) {
1105 $originalLanguage_diffStorage[$field] = $originalLanguageRecord[$field];
1106 $diffStorageFlag = TRUE;
1107 }
1108 }
1109
1110
1111 // If autoversioning is happening we need to perform a nasty hack. The case is parallel to a similar hack inside checkValue_group_select_file().
1112 // When a copy or version is made of a record, a search is made for any RTEmagic* images in fields having the "images" soft reference parser applied. That should be true for RTE fields. If any are found they are duplicated to new names and the file reference in the bodytext is updated accordingly.
1113 // However, with auto-versioning the submitted content of the field will just overwrite the corrected values. This leaves a) lost RTEmagic files and b) creates a double reference to the old files.
1114 // The only solution I can come up with is detecting when auto versioning happens, then see if any RTEmagic images was copied and if so make a stupid string-replace of the content !
1115 if ($this->autoVersioningUpdate===TRUE) {
1116 if (is_array($this->RTEmagic_copyIndex[$table][$id][$field])) {
1117 foreach($this->RTEmagic_copyIndex[$table][$id][$field] as $oldRTEmagicName => $newRTEmagicName) {
1118 $fieldArray[$field] = str_replace(' src="'.$oldRTEmagicName.'"',' src="'.$newRTEmagicName.'"',$fieldArray[$field]);
1119 }
1120 }
1121 }
1122
1123 } elseif ($TCA[$table]['ctrl']['origUid']===$field) { // Allow value for original UID to pass by...
1124 $fieldArray[$field] = $fieldValue;
1125 }
1126 break;
1127 }
1128 } // Checking language.
1129 } // Check exclude fields / disabled fields...
1130 }
1131 // Add diff-storage information:
1132 if ($diffStorageFlag && !isset($fieldArray[$TCA[$table]['ctrl']['transOrigDiffSourceField']])) { // If the field is set it would probably be because of an undo-operation - in which case we should not update the field of course...
1133 $fieldArray[$TCA[$table]['ctrl']['transOrigDiffSourceField']] = serialize($originalLanguage_diffStorage);
1134 }
1135
1136 // Checking for RTE-transformations of fields:
1137 $types_fieldConfig = t3lib_BEfunc::getTCAtypes($table,$currentRecord);
1138 $theTypeString = t3lib_BEfunc::getTCAtypeValue($table,$currentRecord);
1139 if (is_array($types_fieldConfig)) {
1140 reset($types_fieldConfig);
1141 while(list(,$vconf) = each($types_fieldConfig)) {
1142 // Write file configuration:
1143 $eFile = t3lib_parsehtml_proc::evalWriteFile($vconf['spec']['static_write'],array_merge($currentRecord,$fieldArray)); // inserted array_merge($currentRecord,$fieldArray) 170502
1144
1145 // RTE transformations:
1146 if (!$this->dontProcessTransformations) {
1147 if (isset($fieldArray[$vconf['field']])) {
1148 // Look for transformation flag:
1149 switch((string)$incomingFieldArray['_TRANSFORM_'.$vconf['field']]) {
1150 case 'RTE':
1151 $RTEsetup = $this->BE_USER->getTSConfig('RTE',t3lib_BEfunc::getPagesTSconfig($tscPID));
1152 $thisConfig = t3lib_BEfunc::RTEsetup($RTEsetup['properties'],$table,$vconf['field'],$theTypeString);
1153
1154 // Set alternative relative path for RTE images/links:
1155 $RTErelPath = is_array($eFile) ? dirname($eFile['relEditFile']) : '';
1156
1157 // Get RTE object, draw form and set flag:
1158 $RTEobj = &t3lib_BEfunc::RTEgetObj();
1159 if (is_object($RTEobj)) {
1160 $fieldArray[$vconf['field']] = $RTEobj->transformContent('db',$fieldArray[$vconf['field']],$table,$vconf['field'],$currentRecord,$vconf['spec'],$thisConfig,$RTErelPath,$currentRecord['pid']);
1161 } else {
1162 debug('NO RTE OBJECT FOUND!');
1163 }
1164 break;
1165 }
1166 }
1167 }
1168
1169 // Write file configuration:
1170 if (is_array($eFile)) {
1171 $mixedRec = array_merge($currentRecord,$fieldArray);
1172 $SW_fileContent = t3lib_div::getUrl($eFile['editFile']);
1173 $parseHTML = t3lib_div::makeInstance('t3lib_parsehtml_proc');
1174 /* @var $parseHTML t3lib_parsehtml_proc */
1175 $parseHTML->init('','');
1176
1177 $eFileMarker = $eFile['markerField']&&trim($mixedRec[$eFile['markerField']]) ? trim($mixedRec[$eFile['markerField']]) : '###TYPO3_STATICFILE_EDIT###';
1178 $insertContent = str_replace($eFileMarker,'',$mixedRec[$eFile['contentField']]); // must replace the marker if present in content!
1179
1180 $SW_fileNewContent = $parseHTML->substituteSubpart($SW_fileContent, $eFileMarker, chr(10).$insertContent.chr(10), 1, 1);
1181 t3lib_div::writeFile($eFile['editFile'],$SW_fileNewContent);
1182
1183 // Write status:
1184 if (!strstr($id,'NEW') && $eFile['statusField']) {
1185 $GLOBALS['TYPO3_DB']->exec_UPDATEquery(
1186 $table,
1187 'uid='.intval($id),
1188 array(
1189 $eFile['statusField'] => $eFile['relEditFile'].' updated '.date('d-m-Y H:i:s').', bytes '.strlen($mixedRec[$eFile['contentField']])
1190 )
1191 );
1192 }
1193 } elseif ($eFile && is_string($eFile)) {
1194 $this->log($table,$id,2,0,1,"Write-file error: '%s'",13,array($eFile),$realPid);
1195 }
1196 }
1197 }
1198 // Return fieldArray
1199 return $fieldArray;
1200 }
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213 /*********************************************
1214 *
1215 * Evaluation of input values
1216 *
1217 ********************************************/
1218
1219 /**
1220 * Evaluates a value according to $table/$field settings.
1221 * This function is for real database fields - NOT FlexForm "pseudo" fields.
1222 * NOTICE: Calling this function expects this: 1) That the data is saved! (files are copied and so on) 2) That files registered for deletion IS deleted at the end (with ->removeRegisteredFiles() )
1223 *
1224 * @param string Table name
1225 * @param string Field name
1226 * @param string Value to be evaluated. Notice, this is the INPUT value from the form. The original value (from any existing record) must be manually looked up inside the function if needed - or taken from $currentRecord array.
1227 * @param string The record-uid, mainly - but not exclusively - used for logging
1228 * @param string 'update' or 'new' flag
1229 * @param integer The real PID value of the record. For updates, this is just the pid of the record. For new records this is the PID of the page where it is inserted. If $realPid is -1 it means that a new version of the record is being inserted.
1230 * @param integer $tscPID
1231 * @return array Returns the evaluated $value as key "value" in this array. Can be checked with isset($res['value']) ...
1232 */
1233 function checkValue($table,$field,$value,$id,$status,$realPid,$tscPID) {
1234 global $TCA, $PAGES_TYPES;
1235 t3lib_div::loadTCA($table);
1236
1237 $res = Array(); // result array
1238 $recFID = $table.':'.$id.':'.$field;
1239
1240 // Processing special case of field pages.doktype
1241 if ($table=='pages' && $field=='doktype') {
1242 // If the user may not use this specific doktype, we issue a warning
1243 if (! ($this->admin || t3lib_div::inList($this->BE_USER->groupData['pagetypes_select'],$value))) {
1244 $propArr = $this->getRecordProperties($table,$id);
1245 $this->log($table,$id,5,0,1,"You cannot change the 'doktype' of page '%s' to the desired value.",1,array($propArr['header']),$propArr['event_pid']);
1246 return $res;
1247 };
1248 if ($status=='update') {
1249 // This checks 1) if we should check for disallowed tables and 2) if there are records from disallowed tables on the current page
1250 $onlyAllowedTables = isset($PAGES_TYPES[$value]['onlyAllowedTables']) ? $PAGES_TYPES[$value]['onlyAllowedTables'] : $PAGES_TYPES['default']['onlyAllowedTables'];
1251 if ($onlyAllowedTables) {
1252 $theWrongTables = $this->doesPageHaveUnallowedTables($id,$value);
1253 if ($theWrongTables) {
1254 $propArr = $this->getRecordProperties($table,$id);
1255 $this->log($table,$id,5,0,1,"'doktype' of page '%s' could not be changed because the page contains records from disallowed tables; %s",2,array($propArr['header'],$theWrongTables),$propArr['event_pid']);
1256 return $res;
1257 }
1258 }
1259 }
1260 }
1261
1262 // Get current value:
1263 $curValueRec = $this->recordInfo($table,$id,$field);
1264 $curValue = $curValueRec[$field];
1265
1266 // Getting config for the field
1267 $tcaFieldConf = $TCA[$table]['columns'][$field]['config'];
1268
1269 // Preform processing:
1270 $res = $this->checkValue_SW($res,$value,$tcaFieldConf,$table,$id,$curValue,$status,$realPid,$recFID,$field,$this->uploadedFileArray[$table][$id][$field],$tscPID);
1271
1272 return $res;
1273 }
1274
1275 /**
1276 * Branches out evaluation of a field value based on its type as configured in TCA
1277 * Can be called for FlexForm pseudo fields as well, BUT must not have $field set if so.
1278 *
1279 * @param array The result array. The processed value (if any!) is set in the "value" key.
1280 * @param string The value to set.
1281 * @param array Field configuration from TCA
1282 * @param string Table name
1283 * @param integer Return UID
1284 * @param [type] $curValue: ...
1285 * @param [type] $status: ...
1286 * @param integer The real PID value of the record. For updates, this is just the pid of the record. For new records this is the PID of the page where it is inserted. If $realPid is -1 it means that a new version of the record is being inserted.
1287 * @param [type] $recFID: ...
1288 * @param string Field name. Must NOT be set if the call is for a flexform field (since flexforms are not allowed within flexforms).
1289 * @param [type] $uploadedFiles: ...
1290 * @param [type] $tscPID: ...
1291 * @return array Returns the evaluated $value as key "value" in this array.
1292 */
1293 function checkValue_SW($res,$value,$tcaFieldConf,$table,$id,$curValue,$status,$realPid,$recFID,$field,$uploadedFiles,$tscPID) {
1294
1295 $PP = array($table,$id,$curValue,$status,$realPid,$recFID,$tscPID);
1296
1297 switch ($tcaFieldConf['type']) {
1298 case 'text':
1299 case 'passthrough':
1300 case 'user':
1301 $res['value'] = $value;
1302 break;
1303 case 'input':
1304 $res = $this->checkValue_input($res,$value,$tcaFieldConf,$PP,$field);
1305 break;
1306 case 'check':
1307 $res = $this->checkValue_check($res,$value,$tcaFieldConf,$PP);
1308 break;
1309 case 'radio':
1310 $res = $this->checkValue_radio($res,$value,$tcaFieldConf,$PP);
1311 break;
1312 case 'group':
1313 case 'select':
1314 $res = $this->checkValue_group_select($res,$value,$tcaFieldConf,$PP,$uploadedFiles,$field);
1315 break;
1316 case 'inline':
1317 $res = $this->checkValue_inline($res,$value,$tcaFieldConf,$PP,$field);
1318 break;
1319 case 'flex':
1320 if ($field) { // FlexForms are only allowed for real fields.
1321 $res = $this->checkValue_flex($res,$value,$tcaFieldConf,$PP,$uploadedFiles,$field);
1322 }
1323 break;
1324 default:
1325 #debug(array($tcaFieldConf,$res,$value),'NON existing field type:');
1326 break;
1327 }
1328
1329 return $res;
1330 }
1331
1332 /**
1333 * Evaluate "input" type values.
1334 *
1335 * @param array The result array. The processed value (if any!) is set in the "value" key.
1336 * @param string The value to set.
1337 * @param array Field configuration from TCA
1338 * @param array Additional parameters in a numeric array: $table,$id,$curValue,$status,$realPid,$recFID
1339 * @param string Field name
1340 * @return array Modified $res array
1341 */
1342 function checkValue_input($res,$value,$tcaFieldConf,$PP,$field='') {
1343 list($table,$id,$curValue,$status,$realPid,$recFID) = $PP;
1344
1345 // Secures the string-length to be less than max. Will probably make problems with multi-byte strings!
1346 if (intval($tcaFieldConf['max'])>0) {$value = substr($value,0,intval($tcaFieldConf['max']));}
1347
1348 // Checking range of value:
1349 if ($tcaFieldConf['range'] && $value!=$tcaFieldConf['checkbox']) { // If value is not set to the allowed checkbox-value then it is checked against the ranges
1350 if (isset($tcaFieldConf['range']['upper'])&&$value>$tcaFieldConf['range']['upper']) {$value=$tcaFieldConf['range']['upper'];}
1351 if (isset($tcaFieldConf['range']['lower'])&&$value<$tcaFieldConf['range']['lower']) {$value=$tcaFieldConf['range']['lower'];}
1352 }
1353
1354 // Process evaluation settings:
1355 $evalCodesArray = t3lib_div::trimExplode(',',$tcaFieldConf['eval'],1);
1356 $res = $this->checkValue_input_Eval($value,$evalCodesArray,$tcaFieldConf['is_in']);
1357
1358 // Process UNIQUE settings:
1359 if ($field && $realPid>=0) { // Field is NOT set for flexForms - which also means that uniqueInPid and unique is NOT available for flexForm fields! Also getUnique should not be done for versioning and if PID is -1 ($realPid<0) then versioning is happening...
1360 if ($res['value'] && in_array('uniqueInPid',$evalCodesArray)) {
1361 $res['value'] = $this->getUnique($table,$field,$res['value'],$id,$realPid);
1362 }
1363 if ($res['value'] && in_array('unique',$evalCodesArray)) {
1364 $res['value'] = $this->getUnique($table,$field,$res['value'],$id);
1365 }
1366 }
1367
1368 return $res;
1369 }
1370
1371 /**
1372 * Evaluates 'check' type values.
1373 *
1374 * @param array The result array. The processed value (if any!) is set in the 'value' key.
1375 * @param string The value to set.
1376 * @param array Field configuration from TCA
1377 * @param array Additional parameters in a numeric array: $table,$id,$curValue,$status,$realPid,$recFID
1378 * @return array Modified $res array
1379 */
1380 function checkValue_check($res,$value,$tcaFieldConf,$PP) {
1381 list($table,$id,$curValue,$status,$realPid,$recFID) = $PP;
1382
1383 $itemC = count($tcaFieldConf['items']);
1384 if (!$itemC) {$itemC=1;}
1385 $maxV = pow(2,$itemC);
1386
1387 if ($value<0) {$value=0;}
1388 if ($value>$maxV) {$value=$maxV;}
1389 $res['value'] = $value;
1390
1391 return $res;
1392 }
1393
1394 /**
1395 * Evaluates 'radio' type values.
1396 *
1397 * @param array The result array. The processed value (if any!) is set in the 'value' key.
1398 * @param string The value to set.
1399 * @param array Field configuration from TCA
1400 * @param array Additional parameters in a numeric array: $table,$id,$curValue,$status,$realPid,$recFID
1401 * @return array Modified $res array
1402 */
1403 function checkValue_radio($res,$value,$tcaFieldConf,$PP) {
1404 list($table,$id,$curValue,$status,$realPid,$recFID) = $PP;
1405
1406 if (is_array($tcaFieldConf['items'])) {
1407 foreach($tcaFieldConf['items'] as $set) {
1408 if (!strcmp($set[1],$value)) {
1409 $res['value'] = $value;
1410 break;
1411 }
1412 }
1413 }
1414
1415 return $res;
1416 }
1417
1418 /**
1419 * Evaluates 'group' or 'select' type values.
1420 *
1421 * @param array The result array. The processed value (if any!) is set in the 'value' key.
1422 * @param string The value to set.
1423 * @param array Field configuration from TCA
1424 * @param array Additional parameters in a numeric array: $table,$id,$curValue,$status,$realPid,$recFID
1425 * @param [type] $uploadedFiles: ...
1426 * @param string Field name
1427 * @return array Modified $res array
1428 */
1429 function checkValue_group_select($res,$value,$tcaFieldConf,$PP,$uploadedFiles,$field) {
1430
1431 list($table,$id,$curValue,$status,$realPid,$recFID) = $PP;
1432
1433 // Detecting if value sent is an array and if so, implode it around a comma:
1434 if (is_array($value)) {
1435 $value = implode(',',$value);
1436 }
1437
1438 // This converts all occurencies of '&#123;' to the byte 123 in the string - this is needed in very rare cases where filenames with special characters (like ???, umlaud etc) gets sent to the server as HTML entities instead of bytes. The error is done only by MSIE, not Mozilla and Opera.
1439 // Anyways, this should NOT disturb anything else:
1440 $value = $this->convNumEntityToByteValue($value);
1441
1442 // When values are sent as group or select they come as comma-separated values which are exploded by this function:
1443 $valueArray = $this->checkValue_group_select_explodeSelectGroupValue($value);
1444
1445 // If not multiple is set, then remove duplicates:
1446 if (!$tcaFieldConf['multiple']) {
1447 $valueArray = array_unique($valueArray);
1448 }
1449
1450 // If an exclusive key is found, discard all others:
1451 if ($tcaFieldConf['type']=='select' && $tcaFieldConf['exclusiveKeys']) {
1452 $exclusiveKeys = t3lib_div::trimExplode(',', $tcaFieldConf['exclusiveKeys']);
1453 foreach($valueArray as $kk => $vv) {
1454 if (in_array($vv, $exclusiveKeys)) { // $vv is the item key!
1455 $valueArray = Array($kk => $vv);
1456 break;
1457 }
1458 }
1459 }
1460
1461 // This could be a good spot for parsing the array through a validation-function which checks if the values are alright (except that database references are not in their final form - but that is the point, isn't it?)
1462 // NOTE!!! Must check max-items of files before the later check because that check would just leave out filenames if there are too many!!
1463
1464 // Checking for select / authMode, removing elements from $valueArray if any of them is not allowed!
1465 if ($tcaFieldConf['type']=='select' && $tcaFieldConf['authMode']) {
1466 $preCount = count($valueArray);
1467 foreach($valueArray as $kk => $vv) {
1468 if (!$this->BE_USER->checkAuthMode($table,$field,$vv,$tcaFieldConf['authMode'])) {
1469 unset($valueArray[$kk]);
1470 }
1471 }
1472
1473 // During the check it turns out that the value / all values were removed - we respond by simply returning an empty array so nothing is written to DB for this field.
1474 if ($preCount && !count($valueArray)) {
1475 return array();
1476 }
1477 }
1478
1479 // For group types:
1480 if ($tcaFieldConf['type']=='group') {
1481 switch($tcaFieldConf['internal_type']) {
1482 case 'file':
1483 $valueArray = $this->checkValue_group_select_file(
1484 $valueArray,
1485 $tcaFieldConf,
1486 $curValue,
1487 $uploadedFiles,
1488 $status,
1489 $table,
1490 $id,
1491 $recFID
1492 );
1493 break;
1494 case 'db':
1495 $valueArray = $this->checkValue_group_select_processDBdata($valueArray,$tcaFieldConf,$id,$status,'group', $table);
1496 break;
1497 }
1498 }
1499 // For select types which has a foreign table attached:
1500 if ($tcaFieldConf['type']=='select' && $tcaFieldConf['foreign_table']) {
1501 // check, if there is a NEW... id in the value, that should be substituded later
1502 if (strpos($value, 'NEW') !== false) {
1503 $this->remapStackRecords[$table][$id] = array('remapStackIndex' => count($this->remapStack));
1504 $this->remapStack[] = array(
1505 'func' => 'checkValue_group_select_processDBdata',
1506 'args' => array($valueArray,$tcaFieldConf,$id,$status,'select',$table),
1507 'pos' => array('valueArray' => 0, 'tcaFieldConf' => 1, 'id' => 2, 'table' => 5),
1508 'field' => $field
1509 );
1510 $unsetResult = true;
1511 } else {
1512 $valueArray = $this->checkValue_group_select_processDBdata($valueArray,$tcaFieldConf,$id,$status,'select', $table);
1513 }
1514 }
1515
1516 if (!$unsetResult) {
1517 $newVal=$this->checkValue_checkMax($tcaFieldConf, $valueArray);
1518 $res['value'] = implode(',',$newVal);
1519 } else {
1520 unset($res['value']);
1521 }
1522
1523 return $res;
1524 }
1525
1526 /**
1527 * Handling files for group/select function
1528 *
1529 * @param array Array of incoming file references. Keys are numeric, values are files (basically, this is the exploded list of incoming files)
1530 * @param array Configuration array from TCA of the field
1531 * @param string Current value of the field
1532 * @param array Array of uploaded files, if any
1533 * @param string Status ("update" or ?)
1534 * @param string tablename of record
1535 * @param integer UID of record
1536 * @param string Field identifier ([table:uid:field:....more for flexforms?]
1537 * @return array Modified value array
1538 * @see checkValue_group_select()
1539 */
1540 function checkValue_group_select_file($valueArray,$tcaFieldConf,$curValue,$uploadedFileArray,$status,$table,$id,$recFID) {
1541
1542 if (!$this->bypassFileHandling) { // If filehandling should NOT be bypassed, do processing:
1543
1544 // If any files are uploaded, add them to value array
1545 if (is_array($uploadedFileArray) &&
1546 $uploadedFileArray['name'] &&
1547 strcmp($uploadedFileArray['tmp_name'],'none')) {
1548 $valueArray[]=$uploadedFileArray['tmp_name'];
1549 $this->alternativeFileName[$uploadedFileArray['tmp_name']] = $uploadedFileArray['name'];
1550 }
1551
1552 // Creating fileFunc object.
1553 if (!$this->fileFunc) {
1554 $this->fileFunc = t3lib_div::makeInstance('t3lib_basicFileFunctions');
1555 $this->include_filefunctions=1;
1556 }
1557 // Setting permitted extensions.
1558 $all_files = Array();
1559 $all_files['webspace']['allow'] = $tcaFieldConf['allowed'];
1560 $all_files['webspace']['deny'] = $tcaFieldConf['disallowed'] ? $tcaFieldConf['disallowed'] : '*';
1561 $all_files['ftpspace'] = $all_files['webspace'];
1562 $this->fileFunc->init('', $all_files);
1563 }
1564
1565 // If there is an upload folder defined:
1566 if ($tcaFieldConf['uploadfolder']) {
1567 if (!$this->bypassFileHandling) { // If filehandling should NOT be bypassed, do processing:
1568 // For logging..
1569 $propArr = $this->getRecordProperties($table,$id);
1570
1571 // Get destrination path:
1572 $dest = $this->destPathFromUploadFolder($tcaFieldConf['uploadfolder']);
1573
1574 // If we are updating:
1575 if ($status=='update') {
1576
1577 // Traverse the input values and convert to absolute filenames in case the update happens to an autoVersionized record.
1578 // Background: This is a horrible workaround! The problem is that when a record is auto-versionized the files of the record get copied and therefore get new names which is overridden with the names from the original record in the incoming data meaning both lost files and double-references!
1579 // The only solution I could come up with (except removing support for managing files when autoversioning) was to convert all relative files to absolute names so they are copied again (and existing files deleted). This should keep references intact but means that some files are copied, then deleted after being copied _again_.
1580 // Actually, the same problem applies to database references in case auto-versioning would include sub-records since in such a case references are remapped - and they would be overridden due to the same principle then.
1581 // Illustration of the problem comes here:
1582 // We have a record 123 with a file logo.gif. We open and edit the files header in a workspace. So a new version is automatically made.
1583 // The versions uid is 456 and the file is copied to "logo_01.gif". But the form data that we sent was based on uid 123 and hence contains the filename "logo.gif" from the original.
1584 // The file management code below will do two things: First it will blindly accept "logo.gif" as a file attached to the record (thus creating a double reference) and secondly it will find that "logo_01.gif" was not in the incoming filelist and therefore should be deleted.
1585 // If we prefix the incoming file "logo.gif" with its absolute path it will be seen as a new file added. Thus it will be copied to "logo_02.gif". "logo_01.gif" will still be deleted but since the files are the same the difference is zero - only more processing and file copying for no reason. But it will work.
1586 if ($this->autoVersioningUpdate===TRUE) {
1587 foreach($valueArray as $key => $theFile) {
1588 if ($theFile===basename($theFile)) { // If it is an already attached file...
1589 $valueArray[$key] = PATH_site.$tcaFieldConf['uploadfolder'].'/'.$theFile;
1590 }
1591 }
1592 }
1593
1594 // Finding the CURRENT files listed, either from MM or from the current record.
1595 $theFileValues=array();
1596 if ($tcaFieldConf['MM']) { // If MM relations for the files also!
1597 $dbAnalysis = t3lib_div::makeInstance('t3lib_loadDBGroup');
1598 /* @var $dbAnalysis t3lib_loadDBGroup */
1599 $dbAnalysis->start('','files',$tcaFieldConf['MM'],$id);
1600 reset($dbAnalysis->itemArray);
1601 while (list($somekey,$someval)=each($dbAnalysis->itemArray)) {
1602 if ($someval['id']) {
1603 $theFileValues[]=$someval['id'];
1604 }
1605 }
1606 } else {
1607 $theFileValues=t3lib_div::trimExplode(',',$curValue,1);
1608 }
1609
1610 // DELETE files: If existing files were found, traverse those and register files for deletion which has been removed:
1611 if (count($theFileValues)) {
1612 // Traverse the input values and for all input values which match an EXISTING value, remove the existing from $theFileValues array (this will result in an array of all the existing files which should be deleted!)
1613 foreach($valueArray as $key => $theFile) {
1614 if ($theFile && !strstr(t3lib_div::fixWindowsFilePath($theFile),'/')) {
1615 $theFileValues = t3lib_div::removeArrayEntryByValue($theFileValues,$theFile);
1616 }
1617 }
1618
1619 // This array contains the filenames in the uploadfolder that should be deleted:
1620 foreach($theFileValues as $key => $theFile) {
1621 $theFile = trim($theFile);
1622 if (@is_file($dest.'/'.$theFile)) {
1623 $this->removeFilesStore[]=$dest.'/'.$theFile;
1624 } elseif ($theFile) {
1625 $this->log($table,$id,5,0,1,"Could not delete file '%s' (does not exist). (%s)",10,array($dest.'/'.$theFile, $recFID),$propArr['event_pid']);
1626 }
1627 }
1628 }
1629 }
1630
1631 // Traverse the submitted values:
1632 foreach($valueArray as $key => $theFile) {
1633 // NEW FILES? If the value contains '/' it indicates, that the file is new and should be added to the uploadsdir (whether its absolute or relative does not matter here)
1634 if (strstr(t3lib_div::fixWindowsFilePath($theFile),'/')) {
1635 // Init:
1636 $maxSize = intval($tcaFieldConf['max_size']);
1637 $cmd='';
1638 $theDestFile=''; // Must be cleared. Else a faulty fileref may be inserted if the below code returns an error!
1639
1640 // Check various things before copying file:
1641 if (@is_dir($dest) && (@is_file($theFile) || @is_uploaded_file($theFile))) { // File and destination must exist
1642
1643 // Finding size. For safe_mode we have to rely on the size in the upload array if the file is uploaded.
1644 if (is_uploaded_file($theFile) && $theFile==$uploadedFileArray['tmp_name']) {
1645 $fileSize = $uploadedFileArray['size'];
1646 } else {
1647 $fileSize = filesize($theFile);
1648 }
1649
1650 if (!$maxSize || $fileSize<=($maxSize*1024)) { // Check file size:
1651 // Prepare filename:
1652 $theEndFileName = isset($this->alternativeFileName[$theFile]) ? $this->alternativeFileName[$theFile] : $theFile;
1653 $fI = t3lib_div::split_fileref($theEndFileName);
1654
1655 // Check for allowed extension:
1656 if ($this->fileFunc->checkIfAllowed($fI['fileext'], $dest, $theEndFileName)) {
1657 $theDestFile = $this->fileFunc->getUniqueName($this->fileFunc->cleanFileName($fI['file']), $dest);
1658
1659 // If we have a unique destination filename, then write the file:
1660 if ($theDestFile) {
1661 t3lib_div::upload_copy_move($theFile,$theDestFile);
1662 $this->copiedFileMap[$theFile] = $theDestFile;
1663 clearstatcache();
1664 if (!@is_file($theDestFile)) $this->log($table,$id,5,0,1,"Copying file '%s' failed!: The destination path (%s) may be write protected. Please make it write enabled!. (%s)",16,array($theFile, dirname($theDestFile), $recFID),$propArr['event_pid']);
1665 } else $this->log($table,$id,5,0,1,"Copying file '%s' failed!: No destination file (%s) possible!. (%s)",11,array($theFile, $theDestFile, $recFID),$propArr['event_pid']);
1666 } else $this->log($table,$id,5,0,1,"Fileextension '%s' not allowed. (%s)",12,array($fI['fileext'], $recFID),$propArr['event_pid']);
1667 } else $this->log($table,$id,5,0,1,"Filesize (%s) of file '%s' exceeds limit (%s). (%s)",13,array(t3lib_div::formatSize($fileSize),$theFile,t3lib_div::formatSize($maxSize*1024),$recFID),$propArr['event_pid']);
1668 } else $this->log($table,$id,5,0,1,'The destination (%s) or the source file (%s) does not exist. (%s)',14,array($dest, $theFile, $recFID),$propArr['event_pid']);
1669
1670 // If the destination file was created, we will set the new filename in the value array, otherwise unset the entry in the value array!
1671 if (@is_file($theDestFile)) {
1672 $info = t3lib_div::split_fileref($theDestFile);
1673 $valueArray[$key]=$info['file']; // The value is set to the new filename
1674 } else {
1675 unset($valueArray[$key]); // The value is set to the new filename
1676 }
1677 }
1678 }
1679 }
1680
1681 // If MM relations for the files, we will set the relations as MM records and change the valuearray to contain a single entry with a count of the number of files!
1682 if ($tcaFieldConf['MM']) {
1683 $dbAnalysis = t3lib_div::makeInstance('t3lib_loadDBGroup');
1684 /* @var $dbAnalysis t3lib_loadDBGroup */
1685 $dbAnalysis->tableArray['files']=array(); // dummy
1686
1687 reset($valueArray);
1688 while (list($key,$theFile)=each($valueArray)) {
1689 // explode files
1690 $dbAnalysis->itemArray[]['id']=$theFile;
1691 }
1692 if ($status=='update') {
1693 $dbAnalysis->writeMM($tcaFieldConf['MM'],$id,0);
1694 } else {
1695 $this->dbAnalysisStore[] = array($dbAnalysis, $tcaFieldConf['MM'], $id, 0); // This will be traversed later to execute the actions
1696 }
1697 $valueArray = $dbAnalysis->countItems();
1698 }
1699 }
1700
1701 return $valueArray;
1702 }
1703
1704 /**
1705 * Evaluates 'flex' type values.
1706 *
1707 * @param array The result array. The processed value (if any!) is set in the 'value' key.
1708 * @param string The value to set.
1709 * @param array Field configuration from TCA
1710 * @param array Additional parameters in a numeric array: $table,$id,$curValue,$status,$realPid,$recFID
1711 * @param array Uploaded files for the field
1712 * @param array Current record array.
1713 * @param string Field name
1714 * @return array Modified $res array
1715 */
1716 function checkValue_flex($res,$value,$tcaFieldConf,$PP,$uploadedFiles,$field) {
1717 list($table,$id,$curValue,$status,$realPid,$recFID) = $PP;
1718
1719 if (is_array($value)) {
1720
1721 // This value is necessary for flex form processing to happen on flexform fields in page records when they are copied.
1722 // The problem is, that when copying a page, flexfrom XML comes along in the array for the new record - but since $this->checkValue_currentRecord does not have a uid or pid for that sake, the t3lib_BEfunc::getFlexFormDS() function returns no good DS. For new records we do know the expected PID so therefore we send that with this special parameter. Only active when larger than zero.
1723 $newRecordPidValue = $status=='new' ? $realPid : 0;
1724
1725 // Get current value array:
1726 $dataStructArray = t3lib_BEfunc::getFlexFormDS($tcaFieldConf,$this->checkValue_currentRecord,$table,'',TRUE,$newRecordPidValue);
1727
1728 $currentValueArray = t3lib_div::xml2array($curValue);
1729 if (!is_array($currentValueArray)) $currentValueArray = array();
1730 if (is_array($currentValueArray['meta']['currentLangId'])) unset($currentValueArray['meta']['currentLangId']); // Remove all old meta for languages...
1731
1732 // Evaluation of input values:
1733 $value['data'] = $this->checkValue_flex_procInData($value['data'],$currentValueArray['data'],$uploadedFiles['data'],$dataStructArray,$PP);
1734
1735 // Create XML and convert charsets from input value:
1736 $xmlValue = $this->checkValue_flexArray2Xml($value,TRUE);
1737
1738 // If we wanted to set UTF fixed:
1739 // $storeInCharset='utf-8';
1740 // $currentCharset=$GLOBALS['LANG']->charSet;
1741 // $xmlValue = $GLOBALS['LANG']->csConvObj->conv($xmlValue,$currentCharset,$storeInCharset,1);
1742 $storeInCharset=$GLOBALS['LANG']->charSet;
1743
1744 // Merge them together IF they are both arrays:
1745 // Here we convert the currently submitted values BACK to an array, then merge the two and then BACK to XML again. This is needed to ensure the charsets are the same (provided that the current value was already stored IN the charset that the new value is converted to).
1746 if (is_array($currentValueArray)) {
1747 $arrValue = t3lib_div::xml2array($xmlValue);
1748 $arrValue = t3lib_div::array_merge_recursive_overrule($currentValueArray,$arrValue);
1749 $xmlValue = $this->checkValue_flexArray2Xml($arrValue,TRUE);
1750 }
1751
1752 // Action commands (sorting order and removals of elements)
1753 $actionCMDs = t3lib_div::_GP('_ACTION_FLEX_FORMdata');
1754 if (is_array($actionCMDs[$table][$id][$field]['data'])) {
1755 $arrValue = t3lib_div::xml2array($xmlValue);
1756 $this->_ACTION_FLEX_FORMdata($arrValue['data'],$actionCMDs[$table][$id][$field]['data']);
1757 $xmlValue = $this->checkValue_flexArray2Xml($arrValue,TRUE);
1758 }
1759
1760 // Create the value XML:
1761 $res['value']='';
1762 $res['value'].=$xmlValue;
1763 } else { // Passthrough...:
1764 $res['value']=$value;
1765 }
1766
1767 return $res;
1768 }
1769
1770 /**
1771 * Converts an array to FlexForm XML
1772 *
1773 * @param array Array with FlexForm data
1774 * @param boolean If set, the XML prologue is returned as well.
1775 * @return string Input array converted to XML
1776 */
1777 function checkValue_flexArray2Xml($array, $addPrologue=FALSE) {
1778 $flexObj = t3lib_div::makeInstance('t3lib_flexformtools');
1779 /* @var $flexObj t3lib_flexformtools */
1780 return $flexObj->flexArray2Xml($array, $addPrologue);
1781 }
1782
1783 /**
1784 * Actions for flex form element (move, delete)
1785 *
1786 * @param array &$valueArrayToRemoveFrom: by reference
1787 * @param array $deleteCMDS: ... *
1788 * @return void
1789 */
1790 function _ACTION_FLEX_FORMdata(&$valueArray,$actionCMDs) {
1791 if (is_array($valueArray) && is_array($actionCMDs)) {
1792 foreach($actionCMDs as $key => $value) {
1793 if ($key=='_ACTION') {
1794 // First, check if there are "commands":
1795 if (current($actionCMDs[$key])!=="") {
1796 asort($actionCMDs[$key]);
1797 $newValueArray = array();
1798 foreach($actionCMDs[$key] as $idx => $order) {
1799 if (substr($idx,0,3)=="ID-") {
1800 $idx = $this->newIndexMap[$idx];
1801 }
1802 if ($order!="DELETE") { // Just one reflection here: It is clear that when removing elements from a flexform, then we will get lost files unless we act on this delete operation by traversing and deleting files that were referred to.
1803 $newValueArray[$idx] = $valueArray[$idx];
1804 }
1805 unset($valueArray[$idx]);
1806 }
1807 $valueArray = t3lib_div::array_merge($newValueArray,$valueArray);
1808 }
1809 } elseif (is_array($actionCMDs[$key]) && isset($valueArray[$key])) {
1810 $this->_ACTION_FLEX_FORMdata($valueArray[$key],$actionCMDs[$key]);
1811 }
1812 }
1813 }
1814 }
1815
1816 /**
1817 * Evaluates 'inline' type values.
1818 * (partly copied from the select_group function on this issue)
1819 *
1820 * @param array The result array. The processed value (if any!) is set in the 'value' key.
1821 * @param string The value to set.
1822 * @param array Field configuration from TCA
1823 * @param array Additional parameters in a numeric array: $table,$id,$curValue,$status,$realPid,$recFID
1824 * @param string Field name
1825 * @return array Modified $res array
1826 */
1827 function checkValue_inline($res,$value,$tcaFieldConf,$PP,$field) {
1828 list($table, $id, $curValue, $status, $realPid, $recFID) = $PP;
1829
1830 if (!$tcaFieldConf['foreign_table']) {
1831 return false; // Fatal error, inline fields should always have a foreign_table defined
1832 }
1833
1834 // When values are sent they come as comma-separated values which are exploded by this function:
1835 $valueArray = t3lib_div::trimExplode(',', $value);
1836
1837 // Remove duplicates: (should not be needed)
1838 $valueArray = array_unique($valueArray);
1839
1840 // Example for received data:
1841 // $value = 45,NEW4555fdf59d154,12,123
1842 // We need to decide whether we use the stack or can save the relation directly.
1843 if(strpos($value, 'NEW') !== false || !t3lib_div::testInt($id)) {
1844 $this->remapStackRecords[$table][$id] = array('remapStackIndex' => count($this->remapStack));
1845 $this->remapStack[] = array(
1846 'func' => 'checkValue_inline_processDBdata',
1847 'args' => array($valueArray, $tcaFieldConf, $id, $status, $table, $field),
1848 'pos' => array('valueArray' => 0, 'tcaFieldConf' => 1, 'id' => 2, 'table' => 4),
1849 'field' => $field
1850 );
1851 unset($res['value']);
1852 } elseif($value || t3lib_div::testInt($id)) {
1853 $res['value'] = $this->checkValue_inline_processDBdata($valueArray, $tcaFieldConf, $id, $status, $table, $field);
1854 }
1855
1856 return $res;
1857 }
1858
1859 /**
1860 * Checks if a fields has more items than defined via TCA in maxitems.
1861 * If there are more items than allowd, the item list is truncated to the defined number.
1862 *
1863 * @param array $tcaFieldConf: Field configuration from TCA
1864 * @param array $valueArray: Current value array of items
1865 * @return array The truncated value array of items
1866 */
1867 function checkValue_checkMax($tcaFieldConf, $valueArray) {
1868 // BTW, checking for min and max items here does NOT make any sense when MM is used because the above function calls will just return an array with a single item (the count) if MM is used... Why didn't I perform the check before? Probably because we could not evaluate the validity of record uids etc... Hmm...
1869
1870 $valueArrayC = count($valueArray);
1871
1872 // NOTE to the comment: It's not really possible to check for too few items, because you must then determine first, if the field is actual used regarding the CType.
1873 $maxI = isset($tcaFieldConf['maxitems']) ? intval($tcaFieldConf['maxitems']):1;
1874 if ($valueArrayC > $maxI) {$valueArrayC=$maxI;} // Checking for not too many elements
1875
1876 // Dumping array to list
1877 $newVal=array();
1878 foreach($valueArray as $nextVal) {
1879 if ($valueArrayC==0) {break;}
1880 $valueArrayC--;
1881 $newVal[]=$nextVal;
1882 }
1883
1884 return $newVal;
1885 }
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903 /*********************************************
1904 *
1905 * Helper functions for evaluation functions.
1906 *
1907 ********************************************/
1908
1909 /**
1910 * Gets a unique value for $table/$id/$field based on $value
1911 *
1912 * @param string Table name
1913 * @param string Field name for which $value must be unique
1914 * @param string Value string.
1915 * @param integer UID to filter out in the lookup (the record itself...)
1916 * @param integer If set, the value will be unique for this PID
1917 * @return string Modified value (if not-unique). Will be the value appended with a number (until 100, then the function just breaks).
1918 */
1919 function getUnique($table,$field,$value,$id,$newPid=0) {
1920 global $TCA;
1921
1922 // Initialize:
1923 t3lib_div::loadTCA($table);
1924 $whereAdd='';
1925 $newValue='';
1926 if (intval($newPid)) { $whereAdd.=' AND pid='.intval($newPid); } else { $whereAdd.=' AND pid>=0'; } // "AND pid>=0" for versioning
1927 $whereAdd.=$this->deleteClause($table);
1928
1929 // If the field is configured in TCA, proceed:
1930 if (is_array($TCA[$table]) && is_array($TCA[$table]['columns'][$field])) {
1931
1932 // Look for a record which might already have the value:
1933 $res = $GLOBALS['TYPO3_DB']->exec_SELECTquery('uid', $table, $field.'='.$GLOBALS['TYPO3_DB']->fullQuoteStr($value, $table).' AND uid!='.intval($id).$whereAdd);
1934 $counter = 0;
1935
1936 // For as long as records with the test-value existing, try again (with incremented numbers appended).
1937 while ($GLOBALS['TYPO3_DB']->sql_num_rows($res)) {
1938 $newValue = $value.$counter;
1939 $res = $GLOBALS['TYPO3_DB']->exec_SELECTquery('uid', $table, $field.'='.$GLOBALS['TYPO3_DB']->fullQuoteStr($newValue, $table).' AND uid!='.intval($id).$whereAdd);
1940 $counter++;
1941 if ($counter>100) { break; } // At "100" it will give up and accept a duplicate - should probably be fixed to a small hash string instead...!
1942 }
1943 // If the new value is there:
1944 $value = strlen($newValue) ? $newValue : $value;
1945 }
1946 return $value;
1947 }
1948
1949 /**
1950 * Evaluation of 'input'-type values based on 'eval' list
1951 *
1952 * @param string Value to evaluate
1953 * @param array Array of evaluations to traverse.
1954 * @param string Is-in string
1955 * @return string Modified $value
1956 */
1957 function checkValue_input_Eval($value,$evalArray,$is_in) {
1958 $res = Array();
1959 $newValue = $value;
1960 $set = true;
1961
1962 foreach($evalArray as $func) {
1963 switch($func) {
1964 case 'int':
1965 case 'year':
1966 case 'time':
1967 case 'timesec':
1968 $value = intval($value);
1969 break;
1970 case 'date':
1971 case 'datetime':
1972 $value = intval($value);
1973 if ($value>0) {
1974 $value -= date('Z');
1975 }
1976 break;
1977 case 'double2':
1978 $theDec = 0;
1979 for ($a=strlen($value); $a>0; $a--) {
1980 if (substr($value,$a-1,1)=='.' || substr($value,$a-1,1)==',') {
1981 $theDec = substr($value,$a);
1982 $value = substr($value,0,$a-1);
1983 break;
1984 }
1985 }
1986 $theDec = ereg_replace('[^0-9]','',$theDec).'00';
1987 $value = intval(str_replace(' ','',$value)).'.'.substr($theDec,0,2);
1988 break;
1989 case 'md5':
1990 if (strlen($value)!=32){$set=false;}
1991 break;
1992 case 'trim':
1993 $value = trim($value);
1994 break;
1995 case 'upper':
1996 $value = $GLOBALS['LANG']->csConvObj->conv_case($GLOBALS['LANG']->charSet, $value, 'toUpper');
1997 break;
1998 case 'lower':
1999 $value = $GLOBALS['LANG']->csConvObj->conv_case($GLOBALS['LANG']->charSet, $value, 'toLower');
2000 break;
2001 case 'required':
2002 if (!$value) {$set=0;}
2003 break;
2004 case 'is_in':
2005 $c=strlen($value);
2006 if ($c) {
2007 $newVal = '';
2008 for ($a=0;$a<$c;$a++) {
2009 $char = substr($value,$a,1);
2010 if (strstr($is_in,$char)) {
2011 $newVal.=$char;
2012 }
2013 }
2014 $value = $newVal;
2015 }
2016 break;
2017 case 'nospace':
2018 $value = str_replace(' ','',$value);
2019 break;
2020 case 'alpha':
2021 $value = ereg_replace('[^a-zA-Z]','',$value);
2022 break;
2023 case 'num':
2024 $value = ereg_replace('[^0-9]','',$value);
2025 break;
2026 case 'alphanum':
2027 $value = ereg_replace('[^a-zA-Z0-9]','',$value);
2028 break;
2029 case 'alphanum_x':
2030 $value = ereg_replace('[^a-zA-Z0-9_-]','',$value);
2031 break;
2032 default:
2033 if (substr($func, 0, 3) == 'tx_') {
2034 $evalObj = t3lib_div::getUserObj($GLOBALS['TYPO3_CONF_VARS']['SC_OPTIONS']['tce']['formevals'][$func].':&'.$func);
2035 if (is_object($evalObj) && method_exists($evalObj, 'evaluateFieldValue')) {
2036 $value = $evalObj->evaluateFieldValue($value, $is_in, $set);
2037 }
2038 }
2039 break;
2040 }
2041 }
2042 if ($set) {$res['value'] = $value;}
2043 return $res;
2044 }
2045
2046 /**
2047 * Returns data for group/db and select fields
2048 *
2049 * @param array Current value array
2050 * @param array TCA field config
2051 * @param integer Record id, used for look-up of MM relations (local_uid)
2052 * @param string Status string ('update' or 'new')
2053 * @param string The type, either 'select', 'group' or 'inline'
2054 * @param string Table name, needs to be passed to t3lib_loadDBGroup
2055 * @return array Modified value array
2056 */
2057 function checkValue_group_select_processDBdata($valueArray,$tcaFieldConf,$id,$status,$type,$currentTable) {
2058 $tables = $type=='group'?$tcaFieldConf['allowed']:$tcaFieldConf['foreign_table'].','.$tcaFieldConf['neg_foreign_table'];
2059 $prep = $type=='group'?$tcaFieldConf['prepend_tname']:$tcaFieldConf['neg_foreign_table'];
2060
2061 $dbAnalysis = t3lib_div::makeInstance('t3lib_loadDBGroup');
2062 /* @var $dbAnalysis t3lib_loadDBGroup */
2063 $dbAnalysis->registerNonTableValues=$tcaFieldConf['allowNonIdValues'] ? 1 : 0;
2064 $dbAnalysis->start(implode(',',$valueArray),$tables, '', 0, $currentTable, $tcaFieldConf);
2065
2066 if ($tcaFieldConf['MM']) {
2067 if ($status=='update') {
2068 $dbAnalysis->writeMM($tcaFieldConf['MM'],$id,$prep);
2069 } else {
2070 $this->dbAnalysisStore[] = array($dbAnalysis,$tcaFieldConf['MM'],$id,$prep,$currentTable); // This will be traversed later to execute the actions
2071 }
2072 $valueArray = $dbAnalysis->countItems();
2073 } else {
2074 $valueArray = $dbAnalysis->getValueArray($prep);
2075 if ($type=='select' && $prep) {
2076 $valueArray = $dbAnalysis->convertPosNeg($valueArray,$tcaFieldConf['foreign_table'],$tcaFieldConf['neg_foreign_table']);
2077 }
2078 }
2079
2080 // Here we should see if 1) the records exist anymore, 2) which are new and check if the BE_USER has read-access to the new ones.
2081 return $valueArray;
2082 }
2083
2084 /**
2085 * Explodes the $value, which is a list of files/uids (group select)
2086 *
2087 * @param string Input string, comma separated values. For each part it will also be detected if a '|' is found and the first part will then be used if that is the case. Further the value will be rawurldecoded.
2088 * @return array The value array.
2089 */
2090 function checkValue_group_select_explodeSelectGroupValue($value) {
2091 $valueArray = t3lib_div::trimExplode(',',$value,1);
2092 reset($valueArray);
2093 while(list($key,$newVal)=each($valueArray)) {
2094 $temp=explode('|',$newVal,2);
2095 $valueArray[$key] = str_replace(',','',str_replace('|','',rawurldecode($temp[0])));
2096 }
2097 return $valueArray;
2098 }
2099
2100 /**
2101 * Starts the processing the input data for flexforms. This will traverse all sheets / languages and for each it will traverse the sub-structure.
2102 * See checkValue_flex_procInData_travDS() for more details.
2103 * WARNING: Currently, it traverses based on the actual _data_ array and NOT the _structure_. This means that values for non-valid fields, lKey/vKey/sKeys will be accepted! For traversal of data with a call back function you should rather use class.t3lib_flexformtools.php
2104 *
2105 * @param array The 'data' part of the INPUT flexform data
2106 * @param array The 'data' part of the CURRENT flexform data
2107 * @param array The uploaded files for the 'data' part of the INPUT flexform data
2108 * @param array Data structure for the form (might be sheets or not). Only values in the data array which has a configuration in the data structure will be processed.
2109 * @param array A set of parameters to pass through for the calling of the evaluation functions
2110 * @param string Optional call back function, see checkValue_flex_procInData_travDS() DEPRICATED, use class.t3lib_flexformtools.php instead for traversal!
2111 * @return array The modified 'data' part.
2112 * @see checkValue_flex_procInData_travDS()
2113 */
2114 function checkValue_flex_procInData($dataPart,$dataPart_current,$uploadedFiles,$dataStructArray,$pParams,$callBackFunc='') {
2115 if (is_array($dataPart)) {
2116 foreach($dataPart as $sKey => $sheetDef) {
2117 list ($dataStruct,$actualSheet) = t3lib_div::resolveSheetDefInDS($dataStructArray,$sKey);
2118 if (is_array($dataStruct) && $actualSheet==$sKey && is_array($sheetDef)) {
2119 foreach($sheetDef as $lKey => $lData) {
2120 $this->checkValue_flex_procInData_travDS(
2121 $dataPart[$sKey][$lKey],
2122 $dataPart_current[$sKey][$lKey],
2123 $uploadedFiles[$sKey][$lKey],
2124 $dataStruct['ROOT']['el'],
2125 $pParams,
2126 $callBackFunc,
2127 $sKey.'/'.$lKey.'/'
2128 );
2129 }
2130 }
2131 }
2132 }
2133
2134 return $dataPart;
2135 }
2136
2137 /**
2138 * Processing of the sheet/language data array
2139 * When it finds a field with a value the processing is done by ->checkValue_SW() by default but if a call back function name is given that method in this class will be called for the processing instead.
2140 *
2141 * @param array New values (those being processed): Multidimensional Data array for sheet/language, passed by reference!
2142 * @param array Current values: Multidimensional Data array. May be empty array() if not needed (for callBackFunctions)
2143 * @param array Uploaded files array for sheet/language. May be empty array() if not needed (for callBackFunctions)
2144 * @param array Data structure which fits the data array
2145 * @param array A set of parameters to pass through for the calling of the evaluation functions / call back function
2146 * @param string Call back function, default is checkValue_SW(). If $this->callBackObj is set to an object, the callback function in that object is called instead.
2147 * @param [type] $structurePath: ...
2148 * @return void
2149 * @see checkValue_flex_procInData()
2150 */
2151 function checkValue_flex_procInData_travDS(&$dataValues,$dataValues_current,$uploadedFiles,$DSelements,$pParams,$callBackFunc,$structurePath) {
2152 if (is_array($DSelements)) {
2153
2154 // For each DS element:
2155 foreach($DSelements as $key => $dsConf) {
2156
2157 // Array/Section:
2158 if ($DSelements[$key]['type']=='array') {
2159 if (is_array($dataValues[$key]['el'])) {
2160 if ($DSelements[$key]['section']) {
2161 $newIndexCounter=0;
2162 foreach($dataValues[$key]['el'] as $ik => $el) {
2163 if (is_array($el)) {
2164 if (!is_array($dataValues_current[$key]['el'])) $dataValues_current[$key]['el']=array();
2165
2166 $theKey = key($el);
2167
2168 if (is_array($dataValues[$key]['el'][$ik][$theKey]['el'])) {
2169 $this->checkValue_flex_procInData_travDS(
2170 $dataValues[$key]['el'][$ik][$theKey]['el'],
2171 is_array($dataValues_current[$key]['el'][$ik]) ? $dataValues_current[$key]['el'][$ik][$theKey]['el'] : array(),
2172 $uploadedFiles[$key]['el'][$ik][$theKey]['el'],
2173 $DSelements[$key]['el'][$theKey]['el'],
2174 $pParams,
2175 $callBackFunc,
2176 $structurePath.$key.'/el/'.$ik.'/'.$theKey.'/el/'
2177 );
2178
2179 // If element is added dynamically in the flexform of TCEforms, we map the ID-string to the next numerical index we can have in that particular section of elements:
2180 // The fact that the order changes is not important since order is controlled by a separately submitted index.
2181
2182 if (substr($ik,0,3)=="ID-") {
2183 $newIndexCounter++;
2184 $this->newIndexMap[$ik] = (is_array($dataValues_current[$key]['el'])&&count($dataValues_current[$key]['el'])?max(array_keys($dataValues_current[$key]['el'])):0)+$newIndexCounter; // Set mapping index
2185 $dataValues[$key]['el'][$this->newIndexMap[$ik]] = $dataValues[$key]['el'][$ik]; // Transfer values
2186 unset($dataValues[$key]['el'][$ik]); // Unset original
2187 }
2188 }
2189 }
2190 }
2191 } else {
2192 if (!isset($dataValues[$key]['el'])) $dataValues[$key]['el']=array();
2193 $this->checkValue_flex_procInData_travDS(
2194 $dataValues[$key]['el'],
2195 $dataValues_current[$key]['el'],
2196 $uploadedFiles[$key]['el'],
2197 $DSelements[$key]['el'],
2198 $pParams,
2199 $callBackFunc,
2200 $structurePath.$key.'/el/'
2201 );
2202 }
2203 }
2204 } else {
2205 if (is_array($dsConf['TCEforms']['config']) && is_array($dataValues[$key])) {
2206 foreach($dataValues[$key] as $vKey => $data) {
2207
2208 if ($callBackFunc) {
2209 if (is_object($this->callBackObj)) {
2210 $res = $this->callBackObj->$callBackFunc(
2211 $pParams,
2212 $dsConf['TCEforms']['config'],
2213 $dataValues[$key][$vKey],
2214 $dataValues_current[$key][$vKey],
2215 $uploadedFiles[$key][$vKey],
2216 $structurePath.$key.'/'.$vKey.'/'
2217 );
2218 } else {
2219 $res = $this->$callBackFunc(
2220 $pParams,
2221 $dsConf['TCEforms']['config'],
2222 $dataValues[$key][$vKey],
2223 $dataValues_current[$key][$vKey],
2224 $uploadedFiles[$key][$vKey],
2225 $structurePath.$key.'/'.$vKey.'/'
2226 );
2227 }
2228 } else { // Default
2229 list($CVtable,$CVid,$CVcurValue,$CVstatus,$CVrealPid,$CVrecFID,$CVtscPID) = $pParams;
2230
2231 $res = $this->checkValue_SW(
2232 array(),
2233 $dataValues[$key][$vKey],
2234 $dsConf['TCEforms']['config'],
2235 $CVtable,
2236 $CVid,
2237 $dataValues_current[$key][$vKey],
2238 $CVstatus,
2239 $CVrealPid,
2240 $CVrecFID,
2241 '',
2242 $uploadedFiles[$key][$vKey],
2243 array(),
2244 $CVtscPID
2245 );
2246
2247 // Look for RTE transformation of field:
2248 if ($dataValues[$key]['_TRANSFORM_'.$vKey] == 'RTE' && !$this->dontProcessTransformations) {
2249
2250 // Unsetting trigger field - we absolutely don't want that into the data storage!
2251 unset($dataValues[$key]['_TRANSFORM_'.$vKey]);
2252
2253 if (isset($res['value'])) {
2254
2255 // Calculating/Retrieving some values here:
2256 list(,,$recFieldName) = explode(':', $CVrecFID);
2257 $theTypeString = t3lib_BEfunc::getTCAtypeValue($CVtable,$this->checkValue_currentRecord);
2258 $specConf = t3lib_BEfunc::getSpecConfParts('',$dsConf['TCEforms']['defaultExtras']);
2259
2260 // Find, thisConfig:
2261 $RTEsetup = $this->BE_USER->getTSConfig('RTE',t3lib_BEfunc::getPagesTSconfig($CVtscPID));
2262 $thisConfig = t3lib_BEfunc::RTEsetup($RTEsetup['properties'],$CVtable,$recFieldName,$theTypeString);
2263
2264 // Get RTE object, draw form and set flag:
2265 $RTEobj = &t3lib_BEfunc::RTEgetObj();
2266 if (is_object($RTEobj)) {
2267 $res['value'] = $RTEobj->transformContent('db',$res['value'],$CVtable,$recFieldName,$this->checkValue_currentRecord,$specConf,$thisConfig,'',$CVrealPid);
2268 } else {
2269 debug('NO RTE OBJECT FOUND!');
2270 }
2271 }
2272 }
2273 }
2274
2275 // Adding the value:
2276 if (isset($res['value'])) {
2277 $dataValues[$key][$vKey] = $res['value'];
2278 }
2279
2280 // Finally, check if new and old values are different (or no .vDEFbase value is found) and if so, we record the vDEF value for diff'ing.
2281 // We do this after $dataValues has been updated since I expect that $dataValues_current holds evaluated values from database (so this must be the right value to compare with).
2282 if (substr($vKey,-9)!='.vDEFbase') {
2283 if ($this->clear_flexFormData_vDEFbase) {
2284 $dataValues[$key][$vKey.'.vDEFbase'] = '';
2285 } elseif ($this->updateModeL10NdiffData && $GLOBALS['TYPO3_CONF_VARS']['BE']['flexFormXMLincludeDiffBase'] && $vKey!=='vDEF' && (strcmp($dataValues[$key][$vKey],$dataValues_current[$key][$vKey]) || !isset($dataValues_current[$key][$vKey.'.vDEFbase']) || $this->updateModeL10NdiffData==='FORCE_FFUPD')) {
2286 // Now, check if a vDEF value is submitted in the input data, if so we expect this has been processed prior to this operation (normally the case since those fields are higher in the form) and we can use that:
2287 if (isset($dataValues[$key]['vDEF'])) {
2288 $diffValue = $dataValues[$key]['vDEF'];
2289 } else { // If not found (for translators with no access to the default language) we use the one from the current-value data set:
2290 $diffValue = $dataValues_current[$key]['vDEF'];
2291 }
2292 // Setting the reference value for vDEF for this translation. This will be used for translation tools to make a diff between the vDEF and vDEFbase to see if an update would be fitting.
2293 $dataValues[$key][$vKey.'.vDEFbase'] = $diffValue;
2294 }
2295 }
2296 }
2297 }
2298 }
2299 }
2300 }
2301 }
2302
2303 /**
2304 * Returns data for inline fields.
2305 *
2306 * @param array Current value array
2307 * @param array TCA field config
2308 * @param integer Record id
2309 * @param string Status string ('update' or 'new')
2310 * @param string Table name, needs to be passed to t3lib_loadDBGroup
2311 * @param string The current field the values are modified for
2312 * @return string Modified values
2313 */
2314 protected function checkValue_inline_processDBdata($valueArray, $tcaFieldConf, $id, $status, $table, $field) {
2315 $newValue = '';
2316 $foreignTable = $tcaFieldConf['foreign_table'];
2317
2318 /*
2319 * Fetch the related child records by using t3lib_loadDBGroup:
2320 * @var $dbAnalysis t3lib_loadDBGroup
2321 */
2322 $dbAnalysis = t3lib_div::makeInstance('t3lib_loadDBGroup');
2323 $dbAnalysis->start(implode(',', $valueArray), $foreignTable, '', 0, $table, $tcaFieldConf);
2324 // If the localizazionMode is set to 'keep', the children for the localized parent are kept as in the original untranslated record:
2325 $localizationMode = t3lib_BEfunc::getInlineLocalizationMode($table, $tcaFieldConf);
2326 if ($localizationMode=='keep' && $status=='update') {
2327 // Fetch the current record and determine the original record:
2328 $row = t3lib_BEfunc::getRecordWSOL($table, $id);
2329 if (is_array($row)) {
2330 $language = intval($row[$GLOBALS['TCA'][$table]['ctrl']['languageField']]);
2331 $transOrigPointer = intval($row[$GLOBALS['TCA'][$table]['ctrl']['transOrigPointerField']]);
2332 // If language is set (e.g. 1) and also transOrigPointer (e.g. 123), use transOrigPointer as uid:
2333 if ($language>0 && $transOrigPointer) {
2334 $id = $transOrigPointer;
2335 // If we're in active localizationMode 'keep', prevent from writing data to the field of the parent record:
2336 // (on removing the localized parent, the original (untranslated) children would then also be removed)
2337 $keepTranslation = true;
2338 }
2339 }
2340 }
2341 // IRRE with a pointer field (database normalization):
2342 if ($tcaFieldConf['foreign_field']) {
2343 // if the record was imported, sorting was also imported, so skip this
2344 $skipSorting = ($this->callFromImpExp ? true : false);
2345 // update record in intermediate table (sorting & pointer uid to parent record)
2346 $dbAnalysis->writeForeignField($tcaFieldConf, $id, 0, $skipSorting);
2347 $newValue = ($keepTranslation ? 0 : $dbAnalysis->countItems(false));
2348 // IRRE with comma separated values:
2349 } else {
2350 $valueArray = $dbAnalysis->getValueArray();
2351 // Checking that the number of items is correct:
2352 $valueArray = $this->checkValue_checkMax($tcaFieldConf, $valueArray);
2353 // If a valid translation of the 'keep' mode is active, update relations in the original(!) record:
2354 if ($keepTranslation) {
2355 $this->updateDB($table, $transOrigPointer, array($field => implode(',', $valueArray)));
2356 } else {
2357 $newValue = implode(',', $valueArray);
2358 }
2359 }
2360
2361 return $newValue;
2362 }
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378 /*********************************************
2379 *
2380 * PROCESSING COMMANDS
2381 *
2382 ********************************************/
2383
2384 /**
2385 * Processing the cmd-array
2386 * See "TYPO3 Core API" for a description of the options.
2387 *
2388 * @return void
2389 */
2390 function process_cmdmap() {
2391 global $TCA, $TYPO3_CONF_VARS;
2392
2393 // Editing frozen:
2394 if ($this->BE_USER->workspace!==0 && $this->BE_USER->workspaceRec['freeze']) {
2395 $this->newlog('All editing in this workspace has been frozen!',1);
2396 return FALSE;
2397 }
2398
2399 // Hook initialization:
2400 $hookObjectsArr = array();
2401 if (is_array ($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_tcemain.php']['processCmdmapClass'])) {
2402 foreach ($TYPO3_CONF_VARS['SC_OPTIONS']['t3lib/class.t3lib_tcemain.php']['processCmdmapClass'] as $classRef) {
2403 $hookObjectsArr[] = &t3lib_div::getUserObj($classRef);
2404 }
2405 }
2406 #debug($this->cmdmap);
2407
2408 $this->accumulateForNotifEmail = array(); // Reset notification array
2409
2410 // Traverse command map:
2411 reset($this->cmdmap);
2412 while(list($table,) = each($this->cmdmap)) {
2413
2414 // Check if the table may be modified!
2415 $modifyAccessList = $this->checkModifyAccessList($table);
2416 if (!$modifyAccessList) {
2417 $id = 0;
2418 $this->log($table,$id,2,0,1,"Attempt to modify table '%s' without permission",1,array($table));
2419 } // FIXME: $id not set here (Comment added by Sebastian Kurfuerst)
2420
2421 // Check basic permissions and circumstances:
2422 if (isset($TCA[$table]) && !$this->tableReadOnly($table) && is_array($this->cmdmap[$table]) && $modifyAccessList) {
2423
2424 // Traverse the command map:
2425 foreach($this->cmdmap[$table] as $id => $incomingCmdArray) {
2426 if (is_array($incomingCmdArray)) { // have found a command.
2427
2428 // Get command and value (notice, only one command is observed at a time!):
2429 reset($incomingCmdArray);
2430 $command = key($incomingCmdArray);
2431 $value = current($incomingCmdArray);
2432
2433 foreach($hookObjectsArr as $hookObj) {
2434 if (method_exists($hookObj, 'processCmdmap_preProcess')) {
2435 $hookObj->processCmdmap_preProcess($command, $table, $id, $value, $this);
2436 }
2437 }
2438
2439 // Init copyMapping array:
2440 $this->copyMappingArray = Array(); // Must clear this array before call from here to those functions: Contains mapping information between new and old id numbers.
2441
2442 // Branch, based on command
2443 switch ($command) {
2444 case 'move':
2445 $this->moveRecord($table,$id,$value);
2446 break;
2447 case 'copy':
2448 if ($table === 'pages') {
2449 $this->copyPages($id,$value);
2450 } else {
2451 $this->copyRecord($table,$id,$value,1);
2452 }
2453 break;
2454 case 'localize':
2455 $this->localize($table,$id,$value);
2456 break;
2457 case 'inlineLocalizeSynchronize':
2458 $this->inlineLocalizeSynchronize($table, $id, $value);
2459 break;
2460 case 'version':
2461 switch ((string)$value['action']) {
2462 case 'new':
2463 $versionizeTree = t3lib_div::intInRange(!isset($value['treeLevels'])?-1:$value['treeLevels'],-1,100);
2464 if ($table == 'pages' && $versionizeTree>=0) {
2465 $this->versionizePages($id,$value['label'],$versionizeTree);
2466 } else {
2467 $this->versionizeRecord($table,$id,$value['label']);
2468 }
2469 break;
2470 case 'swap':
2471 $swapMode = $GLOBALS['BE_USER']->getTSConfigVal('options.workspaces.swapMode');
2472 $elementList = array();
2473 if ($swapMode == 'any' || ($swapMode == 'page' && $table == 'pages')) {
2474 // check if we are allowed to do synchronios publish. We must have a single element in the cmdmap to be allowed
2475 if (count($this->cmdmap) == 1 && count($this->cmdmap[$table]) == 1) {
2476 $elementList = $this->findPageElementsForVersionSwap($table, $id, $value['swapWith']);
2477 }
2478 }
2479 if (count($elementList) == 0) {
2480 $elementList[$table][] = array($id, $value['swapWith']);
2481 }
2482 foreach ($elementList as $tbl => $idList) {
2483 foreach ($idList as $idKey => $idSet) {
2484 $this->version_swap($tbl,$idSet[0],$idSet[1],$value['swapIntoWS']);
2485 }
2486 }
2487 break;
2488 case 'clearWSID':
2489 $this->version_clearWSID($table,$id);
2490 break;
2491 case 'flush':
2492 $this->version_clearWSID($table,$id,TRUE);
2493 break;
2494 case 'setStage':
2495 $elementList = array();
2496 $idList = $elementList[$table] = t3lib_div::trimExplode(',',$id,1);
2497 $setStageMode = $GLOBALS['BE_USER']->getTSConfigVal('options.workspaces.changeStageMode');
2498 if ($setStageMode == 'any' || $setStageMode == 'page') {
2499 if (count($idList) == 1) {
2500 $rec = t3lib_BEfunc::getRecord($table, $idList[0], 't3ver_wsid');
2501 $workspaceId = $rec['t3ver_wsid'];
2502 }
2503 else {
2504 $workspaceId = $GLOBALS['BE_USER']->workspace;
2505 }
2506 if ($table !== 'pages') {
2507 if ($setStageMode == 'any') {
2508 // (1) Find page to change stage and (2) find other elements from the same ws to change stage
2509 $pageIdList = array();
2510 $this->findPageIdsForVersionStateChange($table, $idList, $workspaceId, $pageIdList, $elementList);
2511 $this->findPageElementsForVersionStageChange($pageIdList, $workspaceId, $elementList);
2512 }
2513 }
2514 else {
2515 // Find all elements from the same ws to change stage
2516 $this->findRealPageIds($idList);
2517 $this->findPageElementsForVersionStageChange($idList, $workspaceId, $elementList);
2518 }
2519 }
2520
2521 foreach ($elementList as $tbl => $elementIdList) {
2522 foreach($elementIdList as $id) {
2523 $this->version_setStage($tbl,$id,$value['stageId'],$value['comment']?$value['comment']:$this->generalComment, TRUE);
2524 }
2525 }
2526 break;
2527 }
2528 break;
2529 case 'delete':
2530 $this->deleteAction($table, $id);
2531 break;
2532 case 'undelete':
2533 $this->undeleteRecord($table, $id);
2534 break;
2535 }
2536
2537 foreach($hookObjectsArr as $hookObj) {
2538 if (method_exists($hookObj, 'processCmdmap_postProcess')) {
2539 $hookObj->processCmdmap_postProcess($command, $table, $id, $value, $this);
2540 }
2541 }
2542
2543 // Merging the copy-array info together for remapping purposes.
2544 $this->copyMappingArray_merged= t3lib_div::array_merge_recursive_overrule($this->copyMappingArray_merged,$this->copyMappingArray);
2545 }
2546 }
2547 }
2548 }
2549
2550 // Finally, before exit, check if there are ID references to remap. This might be the case if versioning or copying has taken place!
2551 $this->remapListedDBRecords();
2552
2553
2554 // Empty accumulation array:
2555 foreach($this->accumulateForNotifEmail as $notifItem) {
2556 $this->notifyStageChange($notifItem['shared'][0],$notifItem['shared'][1],implode(', ',$notifItem['elements']),0,$notifItem['shared'][2]);
2557 }
2558
2559 $this->accumulateForNotifEmail = array(); // Reset notification array
2560
2561 # die("REMOVE ME");
2562 }
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574 /*********************************************
2575 *
2576 * Cmd: Copying
2577 *
2578 ********************************************/
2579
2580 /**
2581 * Copying a single record
2582 *
2583 * @param string Element table
2584 * @param integer Element UID
2585 * @param integer $destPid: >=0 then it points to a page-id on which to insert the record (as the first element). <0 then it points to a uid from its own table after which to insert it (works if
2586 * @param boolean $first is a flag set, if the record copied is NOT a 'slave' to another record copied. That is, if this record was asked to be copied in the cmd-array
2587 * @param array Associative array with field/value pairs to override directly. Notice; Fields must exist in the table record and NOT be among excluded fields!
2588 * @param string Commalist of fields to exclude from the copy process (might get default values)
2589 * @param integer Language ID (from sys_language table)
2590 * @return integer ID of new record, if any
2591 */
2592 function copyRecord($table, $uid, $destPid, $first=0, $overrideValues=array(), $excludeFields='', $language=0) {
2593 global $TCA;
2594
2595 $uid = $origUid = intval($uid);
2596 // Only copy if the table is defined in TCA, a uid is given and the record wasn't copied before:
2597 if ($TCA[$table] && $uid && !$this->isRecordCopied($table, $uid)) {
2598 t3lib_div::loadTCA($table);
2599 /*
2600 // In case the record to be moved turns out to be an offline version, we have to find the live version and work on that one (this case happens for pages with "branch" versioning type)
2601 if ($lookForLiveVersion = t3lib_BEfunc::getLiveVersionOfRecord($table,$uid,'uid')) {
2602 $uid = $lookForLiveVersion['uid'];
2603 }
2604 // Get workspace version of the source record, if any: Then we will copy workspace version instead:
2605 if ($WSversion = t3lib_BEfunc::getWorkspaceVersionOfRecord($this->BE_USER->workspace, $table, $uid, 'uid,t3ver_oid')) {
2606 $uid = $WSversion['uid'];
2607 }
2608 // Now, the $uid is the actual record we will copy while $origUid is the record we asked to get copied - but that could be a live version.
2609 */
2610 if ($this->doesRecordExist($table,$uid,'show')) { // This checks if the record can be selected which is all that a copy action requires.
2611 $data = Array();
2612
2613 $nonFields = array_unique(t3lib_div::trimExplode(',','uid,perms_userid,perms_groupid,perms_user,perms_group,perms_everybody,t3ver_oid,t3ver_wsid,t3ver_id,t3ver_label,t3ver_state,t3ver_swapmode,t3ver_count,t3ver_stage,t3ver_tstamp,'.$excludeFields,1));
2614
2615 // $row = $this->recordInfo($table,$uid,'*');
2616 $row = t3lib_BEfunc::getRecordWSOL($table,$uid); // So it copies (and localized) content from workspace...
2617 if (is_array($row)) {
2618
2619 // Initializing:
2620 $theNewID = uniqid('NEW');
2621 $enableField = isset($TCA[$table]['ctrl']['enablecolumns']) ? $TCA[$table]['ctrl']['enablecolumns']['disabled'] : '';
2622 $headerField = $TCA[$table]['ctrl']['label'];
2623
2624 // Getting default data:
2625 $defaultData = $this->newFieldArray($table);
2626
2627 // Getting "copy-after" fields if applicable:
2628 $copyAfterFields = $destPid<0 ? $this->fixCopyAfterDuplFields($table,$uid,abs($destPid),0) : array();
2629
2630 // Page TSconfig related:
2631 $tscPID = t3lib_BEfunc::getTSconfig_pidValue($table,$uid,$destPid); // NOT using t3lib_BEfunc::getTSCpid() because we need the real pid - not the ID of a page, if the input is a page...
2632 $TSConfig = $this->getTCEMAIN_TSconfig($tscPID);
2633 $tE = $this->getTableEntries($table,$TSConfig);
2634
2635 // Traverse ALL fields of the selected record:
2636 foreach($row as $field => $value) {
2637 if (!in_array($field,$nonFields)) {
2638
2639 // Get TCA configuration for the field:
2640 $conf = $TCA[$table]['columns'][$field]['config'];
2641
2642 // Preparation/Processing of the value:
2643 if ($field=='pid') { // "pid" is hardcoded of course:
2644 $value = $destPid;
2645 } elseif (isset($overrideValues[$field])) { // Override value...
2646 $value = $overrideValues[$field];
2647 } elseif (isset($copyAfterFields[$field])) { // Copy-after value if available:
2648 $value = $copyAfterFields[$field];
2649 } elseif ($TCA[$table]['ctrl']['setToDefaultOnCopy'] && t3lib_div::inList($TCA[$table]['ctrl']['setToDefaultOnCopy'],$field)) { // Revert to default for some fields:
2650 $value = $defaultData[$field];
2651 } else {
2652 // Hide at copy may override:
2653 if ($first && $field==$enableField && $TCA[$table]['ctrl']['hideAtCopy'] && !$this->neverHideAtCopy && !$tE['disableHideAtCopy']) {
2654 $value=1;
2655 }
2656 // Prepend label on copy:
2657 if ($first && $field==$headerField && $TCA[$table]['ctrl']['prependAtCopy'] && !$tE['disablePrependAtCopy']) {
2658 $value = $this->getCopyHeader($table,$this->resolvePid($table,$destPid),$field,$this->clearPrefixFromValue($table,$value),0);
2659 }
2660 // Processing based on the TCA config field type (files, references, flexforms...)
2661 $value = $this->copyRecord_procBasedOnFieldType($table, $uid, $field, $value, $row, $conf, $tscPID, $language);
2662 }
2663
2664 // Add value to array.
2665 $data[$table][$theNewID][$field] = $value;
2666 }
2667 }
2668
2669 // Overriding values:
2670 if ($TCA[$table]['ctrl']['editlock']) {
2671 $data[$table][$theNewID][$TCA[$table]['ctrl']['editlock']] = 0;
2672 }
2673
2674 // Setting original UID:
2675 if ($TCA[$table]['ctrl']['origUid']) {
2676 $data[$table][$theNewID][$TCA[$table]['ctrl']['origUid']] = $uid;
2677 }
2678
2679 // Do the copy by simply submitting the array through TCEmain:
2680 $copyTCE = t3lib_div::makeInstance('t3lib_TCEmain');
2681 /* @var $copyTCE t3lib_TCEmain */
2682 $copyTCE->stripslashes_values = 0;
2683 $copyTCE->copyTree = $this->copyTree;
2684 $copyTCE->cachedTSconfig = $this->cachedTSconfig; // Copy forth the cached TSconfig
2685 $copyTCE->dontProcessTransformations=1; // Transformations should NOT be carried out during copy
2686
2687 $copyTCE->start($data,'',$this->BE_USER);
2688 $copyTCE->process_datamap();
2689
2690 // Getting the new UID:
2691 $theNewSQLID = $copyTCE->substNEWwithIDs[$theNewID];
2692 if ($theNewSQLID) {
2693 $this->copyRecord_fixRTEmagicImages($table,t3lib_BEfunc::wsMapId($table,$theNewSQLID));
2694 $this->copyMappingArray[$table][$origUid] = $theNewSQLID;
2695 }
2696
2697 // Copy back the cached TSconfig
2698 $this->cachedTSconfig = $copyTCE->cachedTSconfig;
2699 $this->errorLog = array_merge($this->errorLog,$copyTCE->errorLog);
2700 unset($copyTCE);
2701
2702 return $theNewSQLID;
2703 } else $this->log($table,$uid,3,0,1,'Attempt to copy record that did not exist!');
2704 } else $this->log($table,$uid,3,0,1,'Attempt to copy record without permission');
2705 }
2706 }
2707
2708 /**
2709 * Copying pages
2710 * Main function for copying pages.
2711 *
2712 * @param integer Page UID to copy
2713 * @param integer Destination PID: >=0 then it points to a page-id on which to insert the record (as the first element). <0 then it points to a uid from its own table after which to insert it (works if
2714 * @return void
2715 */
2716 function copyPages($uid,$destPid) {
2717
2718 // Initialize:
2719 $uid = intval($uid);
2720 $destPid = intval($destPid);
2721
2722 // Finding list of tables to copy.
2723 $copyTablesArray = $this->admin ? $this->compileAdminTables() : explode(',',$this->BE_USER->groupData['tables_modify']); // These are the tables, the user may modify
2724 if (!strstr($this->copyWhichTables,'*')) { // If not all tables are allowed then make a list of allowed tables: That is the tables that figure in both allowed tables AND the copyTable-list
2725 foreach($copyTablesArray as $k => $table) {
2726 if (!$table || !t3lib_div::inList($this->copyWhichTables.',pages',$table)) { // pages are always going...
2727 unset($copyTablesArray[$k]);
2728 }
2729 }
2730 }
2731 $copyTablesArray = array_unique($copyTablesArray);
2732
2733 // Begin to copy pages if we're allowed to:
2734 if ($this->admin || in_array('pages',$copyTablesArray)) {
2735
2736 // Copy this page we're on. And set first-flag (this will trigger that the record is hidden if that is configured)!
2737 $theNewRootID = $this->copySpecificPage($uid,$destPid,$copyTablesArray,1);
2738
2739 // If we're going to copy recursively...:
2740 if ($theNewRootID && $this->copyTree) {
2741
2742 // Get ALL subpages to copy (read-permissions are respected!):
2743 $CPtable = $this->int_pageTreeInfo(Array(), $uid, intval($this->copyTree), $theNewRootID);
2744
2745 // Now copying the subpages:
2746 foreach($CPtable as $thePageUid => $thePagePid) {
2747 $newPid = $this->copyMappingArray['pages'][$thePagePid];
2748 if (isset($newPid)) {
2749 $this->copySpecificPage($thePageUid,$newPid,$copyTablesArray);
2750 } else {
2751 $this->log('pages',$uid,5,0,1,'Something went wrong during copying branch');
2752 break;
2753 }
2754 }
2755 } // else the page was not copied. Too bad...
2756 } else {
2757 $this->log('pages',$uid,5,0,1,'Attempt to copy page without permission to this table');
2758 }
2759 }
2760
2761 /**
2762 * Copying a single page ($uid) to $destPid and all tables in the array copyTablesArray.
2763 *
2764 * @param integer Page uid
2765 * @param integer Destination PID: >=0 then it points to a page-id on which to insert the record (as the first element). <0 then it points to a uid from its own table after which to insert it (works if
2766 * @param array Table on pages to copy along with the page.
2767 * @param boolean $first is a flag set, if the record copied is NOT a 'slave' to another record copied. That is, if this record was asked to be copied in the cmd-array
2768 * @return integer The id of the new page, if applicable.
2769 */
2770 function copySpecificPage($uid,$destPid,$copyTablesArray,$first=0) {
2771 global $TCA;
2772
2773 // Copy the page itself:
2774 $theNewRootID = $this->copyRecord('pages',$uid,$destPid,$first);
2775
2776 // If a new page was created upon the copy operation we will proceed with all the tables ON that page:
2777 if ($theNewRootID) {
2778 foreach($copyTablesArray as $table) {
2779 if ($table && is_array($TCA[$table]) && $table!='pages') { // all records under the page is copied.
2780 $mres = $GLOBALS['TYPO3_DB']->exec_SELECTquery('uid', $table, 'pid='.intval($uid).$this->deleteClause($table), '', ($TCA[$table]['ctrl']['sortby'] ? $TCA[$table]['ctrl']['sortby'].' DESC' : ''));
2781 while ($row = $GLOBALS['TYPO3_DB']->sql_fetch_assoc($mres)) {
2782 $this->copyRecord($table,$row['uid'], $theNewRootID); // Copying each of the underlying records...
2783 }
2784 }
2785 }
2786 return $theNewRootID;
2787 }
2788 }
2789
2790 /**
2791 * Copying records, but makes a "raw" copy of a record.
2792 * Basically the only thing observed is field processing like the copying of files and correction of ids. All other fields are 1-1 copied.
2793 * Technically the copy is made with THIS instance of the tcemain class contrary to copyRecord() which creates a new instance and uses the processData() function.
2794 * The copy is created by insertNewCopyVersion() which bypasses most of the regular input checking associated with processData() - maybe copyRecord() should even do this as well!?
2795 * This function is used to create new versions of a record.
2796 * NOTICE: DOES NOT CHECK PERMISSIONS to create! And since page permissions are just passed through and not changed to the user who executes the copy we cannot enforce permissions without getting an incomplete copy - unless we change permissions of course.
2797 *
2798 * @param string Element table
2799 * @param integer Element UID
2800 * @param integer Element PID (real PID, not checked)
2801 * @param array Override array - must NOT contain any fields not in the table!
2802 * @return integer Returns the new ID of the record (if applicable)
2803 */
2804 function copyRecord_raw($table,$uid,$pid,$overrideArray=array()) {
2805 global $TCA;
2806
2807 $uid = intval($uid);
2808 // Only copy if the table is defined in TCA, a uid is given and the record wasn't copied before:
2809 if ($TCA[$table] && $uid && !$this->isRecordCopied($table, $uid)) {
2810 t3lib_div::loadTCA($table);
2811 if ($this->doesRecordExist($table,$uid,'show')) {
2812
2813 // Set up fields which should not be processed. They are still written - just passed through no-questions-asked!
2814 $nonFields = array('uid','pid','t3ver_id','t3ver_oid','t3ver_wsid','t3ver_label','t3ver_state','t3ver_swapmode','t3ver_count','t3ver_stage','t3ver_tstamp','perms_userid','perms_groupid','perms_user','perms_group','perms_everybody');
2815
2816 // Select main record:
2817 $row = $this->recordInfo($table,$uid,'*');
2818 if (is_array($row)) {
2819
2820 // Merge in override array.
2821 $row = array_merge($row,$overrideArray);
2822
2823 // Traverse ALL fields of the selected record:
2824 foreach($row as $field => $value) {
2825 if (!in_array($field,$nonFields)) {
2826
2827 // Get TCA configuration for the field:
2828 $conf = $TCA[$table]['columns'][$field]['config'];
2829 if (is_array($conf)) {
2830 // Processing based on the TCA config field type (files, references, flexforms...)
2831 $value = $this->copyRecord_procBasedOnFieldType($table,$uid,$field,$value,$row,$conf,$pid);
2832 }
2833
2834 // Add value to array.
2835 $row[$field] = $value;
2836 }
2837 }
2838
2839 // Force versioning related fields:
2840 $row['pid'] = $pid;
2841
2842 // Setting original UID:
2843 if ($TCA[$table]['ctrl']['origUid']) {
2844 $row[$TCA[$table]['ctrl']['origUid']] = $uid;
2845 }
2846
2847 // Do the copy by internal function
2848 $theNewSQLID = $this->insertNewCopyVersion($table,$row,$pid);
2849 if (